WiFiNugget

Binaries & source code for the Wi-Fi Nugget

Documentation: https://github.com/HakCat-Tech/WiFiNugget/wiki

Quickstart Setup: https://youtu.be/WAG7yCbEFtw

Arduino

Pre-compiled binaries

• DeauthDetector.bin - Wi-Fi deauthentication & dissociation attack detector by @AlexLynd based on @spacehuhn's deauth detector (Precompiled, flash directly with esptool)

• Nugget_Deauther.bin - The Wi-Fi Deauther V2.5 by @spacehuhn, modified for Nugget by @AlexLynd

Code

• Wi-Fi deauthentication & disassociation attack detector by @AlexLynd based on @spacehuhn's deauth detector (See here: https://github.com/HakCat-Tech/HaxxDetector)

• Wi-Fi Deauther - Wi-Fi scanning & attack platform for the ESP8266 by @spacehuhn (See here: https://github.com/HakCat-Tech/esp8266_deauther)

MicroPython

Pre-compiled binaries

• wifinugget_upy_v2.bin - MicroPython firmware that makes use out of WiFiNugget's basic hardware features (screen, buttons, Neopixel), includes main.py, hw.py and sh1106.py. Hold the right button during boot to enable AP mode!
• wifinugget_generic_upy_v1.17.bin - generic MicroPython firmware that was verified to work on WiFiNugget with ESP8266, build 20210902-v1.17

Code

• main.py - Example script for using the Nugget on ESP8266 hardware. Has examples for WiFi config, screen and neopixel control and button state reading. Relies on hw.py for hardware functions, is the script that runs by default when you use the latest MicroPython binary
• hw.py - Nugget hardware definition library to make coding easier; has code for the OLED screen, buttons and the Neopixel. Also has Wemos D0-D8 pin number definitions. Is included in the firmware.
• pack_unpack_test.py - image compression/decompression playground&test file, for developing the compression code that makes display images consume less RAM. You don't need to store this on your Nugget.
• upy_tests/NeopixelTest.py - short script for testing an attached Neopixel strip
• upy_tests/EverythingTest.py - test of SH1106 screen, Neopixel and buttons
• upy_tests/NeopixelTest_CircuitPython.py - short script for testing an attached Neopixel strip (in CircuitPython, only works on S2 version of the Nugget, won't work on ESP8266)

Libraries used

• sh1106.py - robert-hh's SH1106 library