CloudFormation template and CDK stack that contains a CustomResource with Lambda function to allow the setting of the targetAccountIds attribute of the EC2 Image Builder AMI distribution settings which is not currently supported (as of October 2021) in CloudFormation or CDK.

Related tags

Third-party APIs Wrappersec2-imagebuilder-ami-share
Overview

ec2-imagebuilder-ami-share

CloudFormation template and CDK stack that contains a CustomResource with Lambda function to allow the setting of the targetAccountIds attribute of the EC2 Image Builder AMI distribution settings which is not currently supported in CloudFormation or CDK.

EC2 Image Builder simplifies the building, testing, and deployment of Virtual Machine and container images for use on AWS or on-premises. Customers looking to create custom AMIs (Amazon Machine Image) or container images can leverage EC2 Image Builder to significantly reduce the effort of keeping images up-to-date and secure through its simple graphical interface, built-in automation, and AWS-provided security settings.

EC2 Image Builder includes distribution settings that allow for the publishing and sharing of AMIs. Publishing an AMI allows customers to define the AWS accounts and regions to which the generated AMI will be copied. Sharing an AMI allows customers to define the AWS accounts and regions to which the generated AMI will be shared. AWS accounts that have been nominated as targets for AMI sharing are able to launch EC2 instances based on those AMIs.

The AWS CLI fully supports creating and updating distribution settings for AMIs.

AWS CloudFormation offers the capability of defining distribution settings for EC2 Image Builder. However, at the time of writing this blog post, AWS CloudFormation does not provide the capability of defining the target accounts to which a generated AMI will be published. Specifically, the targetAccountIds attribute is not currently exposed through AWS CloudFormation.

This project describes how a CloudFormation Custom Resource can be leveraged to allow customers to access the full set of distribution settings for EC2 Image Builder, including the targetAccountIds attribute, as part of their CloudFormation templates or CDK (Cloud Development Kit) code base.

The project assumes the availability of at least 3 AWS accounts:

  1. A tooling account where the CloudFormation template is deployed and the project resources are created.
  2. A publishing account (or accounts) to which the generated AMI would be published.
  3. A sharing account (or accounts) to whom the generated AMI would be shared.

The code will only deploy resources into the tooling account. The existence of the publishing and sharing accounts are required in order to set the respective EC2 Image Builder distribution configuration settings.

Solution architecture

The solution architecture discussed in this post is presented below:

Solution architecture

  1. A CloudFormation template, generated manually or via CDK, is deployed to the AWS CloudFormation service.
  2. The provided CloudFormation template includes the definition of a custom resource. The custom resource is implement via a Lambda function which will use the Python Boto3 library to update the AMI distribution configuration of EC2 Image Builder, including setting the targetAccountIds attribute. The targetAccountIds attribute is currently not available to CloudFormation but it can be set with the Boto3 library.
  3. The CloudFormation service will call the Lambda function defined in the custom resource, waiting for the result of the Lambda invocation.
  4. Upon successful completion of the Lambda function, CloudFormation will resume the creation of the remaining resources of the stack.

Deploying the CloudFormation project

The relevant section of the EC2ImageBuilderAmiShare.yaml CloudFormation template, in which the Custom Resource and Lambda function are defined, is shown below:

 AmiDistributionLambda:
    Type: 'AWS::Lambda::Function'
    Properties:
      Code:
        ZipFile: |
          ##################################################
          ## EC2 ImageBuilder AMI distribution setting targetAccountIds
          ## is not supported by CloudFormation (as of September 2021).
          ## https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-imagebuilder-distributionconfiguration.html
          ##
          ## This lambda function uses Boto3 for EC2 ImageBuilder in order 
          ## to set the AMI distribution settings which are currently missing from 
          ## CloudFormation - specifically the 'targetAccountIds' attribute
          ## https://boto3.amazonaws.com/v1/documentation/api/latest/reference/services/imagebuilder.html
          ##################################################

          import os
          import boto3
          import botocore
          import json
          import logging
          import cfnresponse

          def get_ssm_parameter(ssm_param_name: str, aws_ssm_region: str):
              ssm = boto3.client('ssm', region_name=aws_ssm_region)
              parameter = ssm.get_parameter(Name=ssm_param_name, WithDecryption=False)
              return parameter['Parameter']

          def get_distributions_configurations(
                  aws_distribution_regions, 
                  ami_distribution_name,
                  publishing_account_ids, 
                  sharing_account_ids
              ):

              distribution_configs = []

              for aws_region in aws_distribution_regions:
                  distribution_config = {
                      'region': aws_region,
                      'amiDistributionConfiguration': {
                          'name': ami_distribution_name,
                          'description': f'AMI Distribution configuration for {ami_distribution_name}',
                          'targetAccountIds': publishing_account_ids,
                          'amiTags': {
                              'PublishTargets': ",".join(publishing_account_ids),
                              'SharingTargets': ",".join(sharing_account_ids)
                          },
                          'launchPermission': {
                              'userIds': sharing_account_ids
                          }
                      }
                  }

                  distribution_configs.append(distribution_config)

              return distribution_configs

          def handler(event, context):
              # set logging
              logger = logging.getLogger()
              logger.setLevel(logging.DEBUG)
              
              # print the event details
              logger.debug(json.dumps(event, indent=2))

              props = event['ResourceProperties']
              aws_region = os.environ['AWS_REGION']
              aws_distribution_regions = props['AwsDistributionRegions']
              imagebuiler_name = props['ImageBuilderName']
              ami_distribution_name = props['AmiDistributionName']
              ami_distribution_arn = props['AmiDistributionArn']
              ssm_publishing_account_ids_param_name = props['PublishingAccountIds']
              ssm_sharing_account_ids_param_name = props['SharingAccountIds']

              publishing_account_ids = get_ssm_parameter(ssm_publishing_account_ids_param_name, aws_region)['Value'].split(",")
              sharing_account_ids = get_ssm_parameter(ssm_sharing_account_ids_param_name, aws_region)['Value'].split(",")

              logger.info(publishing_account_ids)
              logger.info(sharing_account_ids)

              if event['RequestType'] != 'Delete':
                  try:
                      client = boto3.client('imagebuilder')
                      response = client.update_distribution_configuration(
                          distributionConfigurationArn=ami_distribution_arn,
                          description=f"AMI Distribution settings for: {imagebuiler_name}",
                          distributions=get_distributions_configurations(
                              aws_distribution_regions=aws_distribution_regions,
                              ami_distribution_name=ami_distribution_name,
                              publishing_account_ids=publishing_account_ids,
                              sharing_account_ids=sharing_account_ids
                          )
                      )
                      cfnresponse.send(event, context, cfnresponse.SUCCESS, {})
                  except botocore.exceptions.ClientError as err:
                      logger.critical(err)
                      cfnresponse.send(event, context, cfnresponse.FAILED, {})
              
              # nothing to do on delete so send a success response
              cfnresponse.send(event, context, cfnresponse.SUCCESS, {})
      Role:
        'Fn::GetAtt':
          - AmiDistributionLambdaRole
          - Arn
      Handler: index.handler
      Runtime: python3.6
      Timeout: 30
    DependsOn:
      - AmiDistributionLambdaRoleDefaultPolicy
      - AmiDistributionLambdaRole
  AmiPublishingTargetIds:
    Type: 'AWS::SSM::Parameter'
    Properties:
      Type: StringList
      Value:
        Ref: AmiPublishingTargetIdsParameter
      Name: /master-AmiSharing/AmiPublishingTargetIds
  AmiSharingAccountIds:
    Type: 'AWS::SSM::Parameter'
    Properties:
      Type: StringList
      Value: 
        Ref: AmiSharingAccountIdsParameter
      Name: /master-AmiSharing/AmiSharingAccountIds
  AmiDistributionCustomResource:
    Type: 'AWS::CloudFormation::CustomResource'
    Properties:
      ServiceToken:
        'Fn::GetAtt':
          - AmiDistributionLambda
          - Arn
      AwsDistributionRegions: 
        Ref: AmiPublishingRegionsParameter
      ImageBuilderName: AmiDistributionConfig
      AmiDistributionName: 'AmiShare-{{ imagebuilder:buildDate }}'
      AmiDistributionArn:
        'Fn::GetAtt':
          - AmiShareDistributionConfig
          - Arn
      PublishingAccountIds:
        Ref: AmiPublishingTargetIds
      SharingAccountIds:
        Ref: AmiSharingAccountIds
    DependsOn:
      - AmiShareDistributionConfig
    UpdateReplacePolicy: Delete
    DeletionPolicy: Delete

Follow the steps below to deploy the CloudFormation template.

  1. Download the EC2ImageBuilderAmiShare.yaml template file to your local machine.
  2. Log into the AWS Console → navigate to the CloudFormation console.
  3. Click on the Create stack button and choose With new resources (standard).
  4. In the Create stack screen, select the option to Upload a template file.
  5. Choose the EC2ImageBuilderAmiShare.yaml template file.
  6. Click Next.
  7. In the Specify stack details screen, provide the following values:
    1. Stack name: EC2ImageBuilderAmiShare
    2. AmiPublishingRegionsParameter: <AWS region to which the AMI should be published, e.g. us-east-1>
    3. AmiPublishingTargetIdsParameter: <AWS account ids to which the AMI should be published>
    4. AmiSharingAccountIdsParameter: <AWS account ids to whom the AMI should be shared>
    5. SubnetIdParameter: <Select a desired subnet>
    6. VpcIdParameter: <Select a desired VPC>

CloudFormation parameters

  1. Click Next.
  2. On the Configure stack options screen, click Next to accept defaults.
  3. On the Review EC2ImageBuilderAmiShare screen, click the check box for I acknowledge that AWS CloudFormation might create IAM resources with custom names.
  4. Click Create stack.
  5. Confirm that the stack reaches the CREATE_COMPLETE state.

Verify the distribution settings of EC2 Image Builder.

  1. Log into the AWS Console → navigate to the EC2 Image Builder console.
  2. Click on the pipeline with name ami-share-pipeline to open the detailed pipeline view.
  3. Click on the Distribution settings and review the Distribution details.
  4. Confirm that the following values match the parameter values passed to the CloudFormation template:
    1. Region
    2. Target accounts for distribution
    3. Accounts with shared permissions

EC2 Image Builder AMI distribution settings

The CloudFormation template has successfully deployed the EC2 Image Builder and the Target accounts for distribution value has been correctly set through the use of a CustomResource Lambda function.

At this point the pipeline could be Run in order to generate, distribute and share the AMI.

Please note that in order to distribute the generated AMI to other AWS accounts it is necessary to set up cross-account AMI distribution with Image Builder.

Clean up the CloudFormation project

Project clean-up is a single step process:

  1. Delete the EC2ImageBuilderAmiShare stack from CloudFormation.

Delete the EC2ImageBuilderAmiShare CloudFormation stack.

  1. Log into the AWS Console → navigate to the CloudFormation console.
  2. Navigate to Stacks.
  3. Select the EC2ImageBuilderAmiShare.
  4. Click the Delete button.

Deploying the CDK project

The project code uses the Python flavour of the AWS CDK (Cloud Development Kit). In order to execute the code, please ensure that you have fulfilled the AWS CDK Prerequisites for Python.

The relevant section of the CDK ami_share.py stack, in which the Custom Resource and Lambda definition are defined, is shown below:

# Create ami distribution lambda function - this is required because 
# EC2 ImageBuilder AMI distribution setting targetAccountIds
# is not supported by CloudFormation (as of September 2021).
# see https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-imagebuilder-distributionconfiguration.html

# Create a role for the amidistribution lambda function
amidistribution_lambda_role = iam.Role(
    scope=self,
    id=f"amidistributionLambdaRole-{CdkUtils.stack_tag}",
    assumed_by=iam.ServicePrincipal("lambda.amazonaws.com"),
    managed_policies=[
        iam.ManagedPolicy.from_aws_managed_policy_name(
            "service-role/AWSLambdaBasicExecutionRole"
        )
    ]
)
amidistribution_lambda_role.add_to_policy(
    iam.PolicyStatement(
        effect=iam.Effect.ALLOW,
        resources=[ami_share_distribution_config.attr_arn],
        actions=[
            "imagebuilder:UpdateDistributionConfiguration"
        ]
    )
)
amidistribution_lambda_role.add_to_policy(
    iam.PolicyStatement(
        effect=iam.Effect.ALLOW,
        resources=[f"arn:aws:ssm:{core.Aws.REGION}:{core.Aws.ACCOUNT_ID}:parameter/{CdkUtils.stack_tag}-AmiSharing/*"],
        actions=[
                "ssm:GetParameter",
                "ssm:GetParameters",
                "ssm:GetParametersByPath"
        ]
    )
)

# create the lambda that will use boto3 to set the 'targetAccountIds'
# ami distribution setting currently not supported in Cloudformation
ami_distribution_lambda = aws_lambda.Function(
    scope=self,
    id=f"amiDistributionLambda-{CdkUtils.stack_tag}",
    code=aws_lambda.Code.asset("stacks/amishare/resources/amidistribution"),
    handler="ami_distribution.lambda_handler",
    runtime=aws_lambda.Runtime.PYTHON_3_6,
    role=amidistribution_lambda_role
)

# Provider that invokes the ami distribution lambda function
ami_distribution_provider = custom_resources.Provider(
    self, 
    f'AmiDistributionCustomResourceProvider-{CdkUtils.stack_tag}',
    on_event_handler=ami_distribution_lambda
)

# Create a SSM Parameters for AMI Publishing and Sharing Ids
# so as not to hardcode the account id values in the Lambda
ssm_ami_publishing_target_ids = ssm.StringListParameter(
    self, f"AmiPublishingTargetIds-{CdkUtils.stack_tag}",
    parameter_name=f'/{CdkUtils.stack_tag}-AmiSharing/AmiPublishingTargetIds',
    string_list_value=config['imagebuilder']['amiPublishingTargetIds']
)

ssm_ami_sharing_ids = ssm.StringListParameter(
    self, f"AmiSharingAccountIds-{CdkUtils.stack_tag}",
    parameter_name=f'/{CdkUtils.stack_tag}-AmiSharing/AmiSharingAccountIds',
    string_list_value=config['imagebuilder']['amiSharingIds']
)

# The custom resource that uses the ami distribution provider to supply values
ami_distribution_custom_resource = core.CustomResource(
    self, 
    f'AmiDistributionCustomResource-{CdkUtils.stack_tag}',
    service_token=ami_distribution_provider.service_token,
    properties = {
        'CdkStackName': CdkUtils.stack_tag,
        'AwsDistributionRegions': config['imagebuilder']['amiPublishingRegions'],
        'ImageBuilderName': f'AmiDistributionConfig-{CdkUtils.stack_tag}',
        'AmiDistributionName': f"AmiShare-{CdkUtils.stack_tag}" + "-{{ imagebuilder:buildDate }}",
        'AmiDistributionArn': ami_share_distribution_config.attr_arn,
        'PublishingAccountIds': ssm_ami_publishing_target_ids.parameter_name,
        'SharingAccountIds': ssm_ami_sharing_ids.parameter_name
    }
)

ami_distribution_custom_resource.node.add_dependency(ami_share_distribution_config)

# The result obtained from the output of custom resource
ami_distriubtion_arn = core.CustomResource.get_att_string(ami_distribution_custom_resource, attribute_name='AmiDistributionArn')

The ami_distribution.py Lambda function, called by the Custom Resource, is shown below:

##################################################
## EC2 ImageBuilder AMI distribution setting targetAccountIds
## is not supported by CloudFormation (as of September 2021).
## https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-imagebuilder-distributionconfiguration.html
##
## This lambda function uses Boto3 for EC2 ImageBuilder in order 
## to set the AMI distribution settings which are currently missing from 
## CloudFormation - specifically the targetAccountIds attribute
## https://boto3.amazonaws.com/v1/documentation/api/latest/reference/services/imagebuilder.html
##################################################

import os
import boto3
import botocore
import json
import logging

def get_ssm_parameter(ssm_param_name: str, aws_ssm_region: str):
    ssm = boto3.client('ssm', region_name=aws_ssm_region)
    parameter = ssm.get_parameter(Name=ssm_param_name, WithDecryption=False)
    return parameter['Parameter']

def get_distributions_configurations(
        aws_distribution_regions, 
        ami_distribution_name,
        publishing_account_ids, 
        sharing_account_ids
    ):

    distribution_configs = []

    for aws_region in aws_distribution_regions:
        distribution_config = {
            'region': aws_region,
            'amiDistributionConfiguration': {
                'name': ami_distribution_name,
                'description': f'AMI Distribution configuration for {ami_distribution_name}',
                'targetAccountIds': publishing_account_ids,
                'amiTags': {
                    'PublishTargets': ",".join(publishing_account_ids),
                    'SharingTargets': ",".join(sharing_account_ids)
                },
                'launchPermission': {
                    'userIds': sharing_account_ids
                }
            }
        }

        distribution_configs.append(distribution_config)

    return distribution_configs

def lambda_handler(event, context):
    # set logging
    logger = logging.getLogger()
    logger.setLevel(logging.DEBUG)
    
    # print the event details
    logger.debug(json.dumps(event, indent=2))

    props = event['ResourceProperties']
    cdk_stack_name = props['CdkStackName']
    aws_region = os.environ['AWS_REGION']
    aws_distribution_regions = props['AwsDistributionRegions']
    imagebuiler_name = props['ImageBuilderName']
    ami_distribution_name = props['AmiDistributionName']
    ami_distribution_arn = props['AmiDistributionArn']
    ssm_publishing_account_ids_param_name = props['PublishingAccountIds']
    ssm_sharing_account_ids_param_name = props['SharingAccountIds']

    publishing_account_ids = get_ssm_parameter(ssm_publishing_account_ids_param_name, aws_region)['Value'].split(",")
    sharing_account_ids = get_ssm_parameter(ssm_sharing_account_ids_param_name, aws_region)['Value'].split(",")

    logger.info(publishing_account_ids)
    logger.info(sharing_account_ids)

    if event['RequestType'] != 'Delete':
        try:
            client = boto3.client('imagebuilder')
            response = client.update_distribution_configuration(
                distributionConfigurationArn=ami_distribution_arn,
                description=f"AMI Distribution settings for: {imagebuiler_name}",
                distributions=get_distributions_configurations(
                    aws_distribution_regions=aws_distribution_regions,
                    ami_distribution_name=ami_distribution_name,
                    publishing_account_ids=publishing_account_ids,
                    sharing_account_ids=sharing_account_ids
                )
            )
        except botocore.exceptions.ClientError as err:
            raise err

    output = {
        'PhysicalResourceId': f"ami-distribution-id-{cdk_stack_name}",
        'Data': {
            'AmiDistributionArn': ami_distribution_arn
        }
    }
    logger.info("Output: " + json.dumps(output))
    return output

The project requires that the AWS account is bootstrapped in order to allow the deployment of the CDK stack.

# navigate to project directory
cd ec2-imagebuilder-ami-share

# install and activate a Python Virtual Environment
python3 -m venv .venv
source .venv/bin/activate

# install dependant libraries
python -m pip install -r requirements.txt

# bootstrap the account to permit CDK deployments
cdk bootstrap

Upon successful completion of cdk bootstrap, the project is ready to be deployed.

Before deploying the project, some configuration parameters need to be be defined in the cdk.json file.

{
  "app": "python3 app.py",
  "context": {
    "@aws-cdk/aws-apigateway:usagePlanKeyOrderInsensitiveId": true,
    "@aws-cdk/core:enableStackNameDuplicates": "true",
    "aws-cdk:enableDiffNoFail": "true",
    "@aws-cdk/core:stackRelativeExports": "true",
    "@aws-cdk/aws-ecr-assets:dockerIgnoreSupport": true,
    "@aws-cdk/aws-secretsmanager:parseOwnedSecretName": true,
    "@aws-cdk/aws-kms:defaultKeyPolicies": true,
    "@aws-cdk/aws-s3:grantWriteWithoutAcl": true,
    "@aws-cdk/aws-ecs-patterns:removeDefaultDesiredCount": true,
    "@aws-cdk/aws-rds:lowercaseDbIdentifier": true,
    "@aws-cdk/aws-efs:defaultEncryptionAtRest": true,
    "@aws-cdk/aws-lambda:recognizeVersionProps": true,
    "@aws-cdk/aws-cloudfront:defaultSecurityPolicyTLSv1.2_2021": true
  },
  "projectSettings": {
    "vpc": {
      "vpc_id": "<<ADD_VPD_ID_HERE>>",
      "subnet_id": "<<ADD_SUBNET_ID_HERE>>"
    },
    "imagebuilder": {
      "baseImageArn": "amazon-linux-2-x86/2021.4.29",
      "ebsVolumeSize": 8,
      "instanceTypes": [
        "t2.medium"
      ],
      "version": "1.0.0",
      "imageBuilderEmailAddress": "[email protected]",
      "extraTags": {
        "imagePipeline": "AMIBuilder"
      },
      "distributionList": [
        "account1",
        "account2"
      ],
      "amiPublishingRegions": [
        "<<ADD_AMI_PUBLISHING_REGION_HERE>>"
      ],
      "amiPublishingTargetIds": [
        "<<ADD_AMI_PUBLISHING_TARGET_ACCOUNT_IDS_HERE>>"
      ],
      "amiSharingIds": [
        "<<ADD_AMI_SHARING_ACCOUNT_IDS_HERE>>"
      ]
    }
  }
}

Add your environment specific values to the cdk.json file as follows:

  • Replace placeholder <<ADD_VPD_ID_HERE>> with your Vpc Id.
  • Replace placeholder <<ADD_SUBNET_ID_HERE>> with your Subnet Id. The subnet you select must be part of the Vpc you defined in the previous step.
  • Replace placeholder <<ADD_AMI_PUBLISHING_REGION_HERE>> with the AWS regions to which you would like to publish the generated AMIs.
  • Replace placeholder <<ADD_AMI_PUBLISHING_TARGET_ACCOUNT_IDS_HERE>> with the AWS account ids to whom you would like to publish the generated AMIs.
  • Replace placeholder <<ADD_AMI_SHARING_ACCOUNT_IDS_HERE>> with the AWS account ids to whom you would like to share the generated AMIs.

With the placeholders replaced in the cdk.json file, the CDK stack can be deployed with the command below.

cdk deploy

Following a successful deployment, verify that two new stacks have been created within the tooling AWS account:

  • CDKToolkit
  • EC2ImageBuilderAmiShare-main

Log into the AWS Console → navigate to the CloudFormation console:

CDK CloudFormation deployment

Verify the distribution settings of EC2 Image Builder.

  1. Log into the AWS Console → navigate to the EC2 Image Builder console.
  2. Click on the pipeline with name ami-share-pipeline-main to open the detailed pipeline view.
  3. Click on the Distribution settings and review the Distribution details.
  4. Confirm that the following values match the parameter values defined in the cdk.json file.
    1. Region
    2. Target accounts for distribution
    3. Accounts with shared permissions

EC2 Image Builder AMI distribution settings

The CDK stack has successfully deployed the EC2 Image Builder and the Target accounts for distribution value has been correctly set through the use of a CustomResource Lambda function.

At this point the pipeline could be Run in order to generate, distribute and share the AMI.

Please note that in order to distribute the generated AMI to other AWS accounts it is necessary to set up cross-account AMI distribution with Image Builder.

Clean up the CDK project

Project clean-up is a 2 step process:

  1. Destroy the CDK stack.
  2. Delete the CDKToolkit stack from CloudFormation.

Delete the stack deployed by CDK with the command below:

cdk destroy

Destroy the CDK stack

Delete the CDKToolkit CloudFormation stack.

  1. Log into the AWS Console → navigate to the CloudFormation console.
  2. Navigate to Stacks.
  3. Select the CDKToolkit.
  4. Click the Delete button.

Executing unit tests

Unit tests for the project can be executed via the command below:

python3 -m venv .venv
source .venv/bin/activate
cdk synth && python -m pytest -v -c ./tests/pytest.ini

Security

See CONTRIBUTING for more information.

License

This library is licensed under the MIT-0 License. See the LICENSE file.

Owner
AWS Samples
AWS Samples
GitHub Repository
Python SDK for the Buycoins API.

This library provides easy access to the Buycoins API using the Python programming language. It provides all the feature of the API so that you don't need to interact with the API directly. This libr

Musa Rasheed 48 May 04, 2022
Python Telegram Bot Template

Python Telegram Bot Template Concepts Customizable python-telegram-bot template implementing code refactoring to streamline development process: handl

Jansen A. Simanullang 1 Jan 25, 2022
Automating whatsapp with python

whatsapp-automation Automating whatsapp with python used on this project pyautogui pywhatkit pyttsx3 SpeechRecognition colorama embedded in python tim

Miguel 60 Nov 21, 2022
This code is for a bot which will find a Twitter user's most tweeted word and tweet that word, tagging said user

max_tweeted_word This code is for a bot which will find a Twitter user's most tweeted word and tweet that word, tagging said user The program uses twe

Yasho Bapat 1 Nov 29, 2021
My Discord Bot that I used to learn Python. Please disregard the unstructured code!

Botsche My personal Discord Bot. To run this bot, change TOKEN in config.ini to your Discord Bot Token, which can be retrieved from your Discord Dev

Mats Voss 1 Nov 29, 2021
This is Pdisk Upload Bot made using Python with Pyrogram Framework. Its capable of uploading direct download link with thumbnail or without thumbnail & with Title Support.

Pdisk-Upload-Bot Introduction This Is PDisk Upload Bot Used To Upload Direct Link To Pdisk With Thumb Support Deploy Heroku Deploy Local Deploy pip in

HEIMAN PICTURES 32 Oct 21, 2022
Documentation and Samples for the Official HN API

Hacker News API Overview In partnership with Firebase, we're making the public Hacker News data available in near real time. Firebase enables easy acc

Y Combinator Hacker News 9.6k Jan 03, 2023
Crypto Signal Provider - A web application that allows users to select a cryptocurrency

Crypto_Signal_Provider This is a web application that allows users to select a c

Raul 2 Dec 11, 2022
An script where it logs in your instagram account and follows people and likes their posts

InstaFollower An script where it logs in your instagram account and follows people and likes their posts (uses the tags to fetch people) Requirements:

Bless 3 Nov 29, 2022
A Telegram Bot Written In Python

TelegraphUploader A Telegram Bot Written In Python DEPLOY Local Machine Clone the repository Install requirements: pip3 install -r requirements.txt e

Wahyusaputra 2 Dec 29, 2021
Backend.AI Client Library for Python

Backend.AI Client The official API client library for Backend.AI Usage (KeyPair mode) You should set the access key and secret key as environment vari

Lablup 10 Feb 10, 2022
Simple Telegram Bot to Download and Upload Files From Mega.nz

Mega.nz-Bot Simple Telegram Bot to Download Files From Mega.nz and Upload It to Telegram Features All Mega.nz File Links supported No login required A

I'm Not A Bot #Left_TG 245 Jan 01, 2023
A demo titiler for Sentinel 2 Digital Twin dataset

This is a DEMO custom api built on top of TiTiler to create Web Map Tiles from the Digital Twin Sentinel-2 COG created by Sinergise

Development Seed 26 May 21, 2022
The EscapePod Python SDK for Cyb3rVector's EscapePod Extension Proxy

EscapePod Extension SDK for Python by cyb3rdog This is the EscapePod Python SDK for Cyb3rVector's EscapePod Extension Proxy. With this SDK, you can: m

cyb3rdog 3 Mar 07, 2022
The official wrapper for spyse.com API, written in Python, aimed to help developers build their integrations with Spyse.

Python wrapper for Spyse API The official wrapper for spyse.com API, written in Python, aimed to help developers build their integrations with Spyse.

Spyse 15 Nov 22, 2022
Prisma Cloud utility scripts, and a Python SDK for Prisma Cloud APIs.

pcs-toolbox Prisma Cloud utility scripts, and a Python SDK for Prisma Cloud APIs. Table of Contents Support Setup Configuration Script Usage CSPM Scri

Palo Alto Networks 34 Dec 15, 2022
OSINT tool to get information from a Github and Gitlab profile and find user's email addresses leaked on commits.

gitrecon OSINT tool to get information from a Github or Gitlab profile and find user's email addresses leaked on commits. 📚 How does this work? GitHu

GOΠZO 211 Dec 17, 2022
A Telegram Bot written in Python for mirroring files on the Internet to your Google Drive or Telegram

Original Repo mirror-leech-telegram-bot This is a Telegram Bot written in Python for mirroring files on the Internet to your Google Drive or Telegram.

0 Jan 03, 2022
SpaceManJax's open-source Discord Bot. Now on Github!

SpaceManBot This is SpaceManJax's open-source Discord.py Bot. Now on Github! This bot runs on Repl.it, which is a free online code editor. It can do a

Jack 1 Nov 16, 2021
A Discord API Wrapper for Userbots/Selfbots written in Python.

DisCum A simple, easy to use, non-restrictive, synchronous Discord API Wrapper for Selfbots/Userbots written in Python. -using requests and websockets

Liam 450 Dec 27, 2022