Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Overview

Simple Pi-hole Stats Display

Alt text

This Python script outputs Pi-hole statistics on a 2.7" e-ink display, and updates it periodically.

Note: This is just a statistics display script, not the actual DNS Sinkhole. If you're looking to set up a DNS sinkhole, check out the Pi-hole project page, totally unaffiliated with this script.

The display I use is from WaveShare, and this script uses their library. (Instructions on how to install their library can be found in the previous link.)

Configuring the script

There are three variables to customize, which are near the top of main.py.

PIHOLE_IP : The IP address of your Pi-hole instances. (Use localhost if it's running on the same Pi as the PiHole).

DISPLAY_TITLE : A title to display at the top of your stats. Customize it to your liking!

REFRESH_MINUTES : The number of minutes between refreshes. I use five minutes.

Fonts

The fonts folder includes the open-source Roboto font family.

Enjoy! 👍

Owner
Mark McIntyre
Mark McIntyre
An arduino/ESP project that can play back G-Force data previously recorded

An arduino/ESP project that can play back G-Force data previously recorded

7 Apr 12, 2022
A small Python app to converse between MQTT messages and 433MHz RF signals.

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

David Swarbrick 3 Jan 27, 2022
Connect a TeslaMate instance to Home Assistant, using MQTT

TeslaBuddy Connect a TeslaMate instance to Home Assistant, using MQTT. It allows basic control of your Tesla vehicle via Home Assistant (currently, ju

4 May 23, 2022
View your medication from Medisafe Cloud in Home Assistant

Medisafe View your medication from Medisafe Cloud in Home Assistant. This integration adds sensors for today's upcoming, taken, skipped, and missed do

Sam Steele 12 Dec 27, 2022
MicroPython driver for 74HC595 shift registers

MicroPython 74HC595 A MicroPython library for 74HC595 8-bit shift registers. There's both an SPI version and a bit-bang version, each with a slightly

Mike Causer 17 Nov 29, 2022
Provide Unifi device info via api to Home Assistant that will give ap sensors

Unifi AP Device info Provide Unifi device info via api to Home Assistant that will give ap sensors

12 Jan 07, 2023
PBA: Pleco Breeding Assistant

A small monitor that reports the external, fishroom and water change parameters to have suitable water parameters and induce breeding. These two features already represent 50% of the "reproductive su

Mirko Mancin 1 Jan 19, 2022
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

Chris Wood 114 Dec 28, 2022
ok-system-helper是一个简单的系统硬件的实时信息收集工具,使用python3.x开发

ok-system-helper ok-system-helper是一个简单的系统硬件的实时信息收集工具,使用python3.x开发,支持哪些硬件:CPU、内存、SWAP、磁盘、网卡流量。用户可在自己的项目中直接引入、开箱即用,或者结合flask等web框架轻松做成http接口供前端调用,亦可通过注

xlvchao 1 Feb 08, 2022
What if home automation was homoiconic? Just transformations of data? No more YAML!

radiale what if home-automation was also homoiconic? The upper or proximal row contains three bones, to which Gegenbaur has applied the terms radiale,

Felix Barbalet 21 Mar 26, 2022
A simple Python script for toggling Philips Hue Lights by clapping

LightsClap A simple Python script for toggling Philips Hue Lights by clapping Usage pip3 install -r requirements.txt python3 main.py and press the Ent

Flux Industries 2 Nov 16, 2021
This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.

Notspot robot simulation - Python version This repository contains all the files and code needed to simulate the notspot quadrupedal robot using Gazeb

50 Sep 26, 2022
Cascade Drone Swarm Physical Demonstration Project

Cascade Drone Swarm Physical Demonstration Project Table of Contents About The Project Built With Getting Started Prerequisites Installation About The

3 Aug 24, 2022
Universal Xiaomi MIoT integration for Home Assistant

Xiaomi MIoT Raw 简体中文 | English MIoT 协议是小米智能家居从 2018 年起推行的智能设备通信协议规范,此后凡是可接入米家的设备均通过此协议进行通信。此插件按照 MIoT 协议规范与设备通信,实现对设备的状态读取及控制。

1.9k Jan 02, 2023
Plug and Play on Internet of Things with LoRa wireless modulation.

IoT-PnP Plug and Play on Internet of Things with LoRa wireless modulation. Device Side In the '505_PnP' folder has a modified ardunino template code s

Lambert Yang 1 May 19, 2022
DIY split-flap display

The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally availa

Scott Bezek 2.5k Jan 05, 2023
GUI wrapper designed for convenient service work with TI CC1352/CC2538/CC2652 based Zigbee sticks or gateways. Packed into single executable file

ZigStar GW Multi tool is GUI wrapper firtsly designed for convenient service work with Zig Star LAN GW, but now supports any TI CC1352/CC2538/CC2652 b

133 Jan 01, 2023
Code reimplementation of some papers published in SAIL-Lab

SAIL SAIL-Lab统一代码库 Motivation 创建这个项目的动机最早来源于实验室组内成员相互Debug代码的时候遇到的麻烦。

Jianwen Chen 8 Nov 15, 2022
Isaac Gym Environments for Legged Robots

Isaac Gym Environments for Legged Robots This repository provides the environment used to train ANYmal (and other robots) to walk on rough terrain usi

Robotic Systems Lab - Legged Robotics at ETH Zürich 372 Jan 08, 2023
Get input from OLED Joystick, Runs command, Displays output on OLED Screen (Great for P4wnP1)

p4wnsolo-joyterm Gets text input from OLED Joystick Runs the command you typed Displays output on OLED Screen (Great for P4wnP1 - even better on Raspb

PawnSolo 7 Dec 19, 2022