HomeAssistant - Polyaire AirTouch 4 Integration

Related tags

Hardwarehass-airtouch4-platform
Overview

HomeAssistant - Polyaire AirTouch 4 Integration

Custom integration to add an AirTouch 4 AC Controller

Installation:

Copy contents of custom_components/polyaire/ to custom_components/polyaire/ in your Home Assistant config folder.

Installation using HACS

HACS is a community store for Home Assistant. After installation, add this repository to HACS and install the polyaire integration.

Requirements

AirTouch 4 console IP address is required when installing the integration

Services

This custom component creates:

  • one device for each AC unit installed
  • one climate entity for each AC unit installed
  • one fan entity for each group defined, which controls the zone damper
  • one climate entity for each group with ITC installed, which controls the group temperature

For each group with ITC, the fan entity can switch between 2 profiles:

  • Damper - which allows direct damper control via the fan
  • ITC - which allows for temperature control using the ITC
Comments
  • Sensors not updated automatically when changes are made on wall controllers

    Sensors not updated automatically when changes are made on wall controllers

    Updated to version 1.3 (PUSH) which seems to work except that sensors aren't updating automatically when changes are made to target temperature or zone on/off state, either on the AirTouch 4 tablet or on ITC switches.

    I can force updates to happen for all zones by using NodeRed to change the target temperature of a single zone by 0.1 degree. I've set NodeRed to do that every minute. Hopefully you can find some way of automating that in the integration?

    opened by spry-salt 7
  • Room Thermostats all show as Cooling even when heating

    Room Thermostats all show as Cooling even when heating

    I have Airtouch4 in home assistant then linked to HomeKit. Firstly, it works great thanks.

    But the room thermostats in HomeKit all display 'Cooling to ..' when turned on. This occurs no matter the mode of the main thermostat. For example we now have heating running but rooms still read as cooling.

    Is it possible to adjust this?

    Thanks

    opened by kylecwhite 6
  • HA Reboot requires Integration disable/enable

    HA Reboot requires Integration disable/enable

    After a reboot of home assistant the integration has an error stating it is unable to contact the AirTouch controller. Disabling and re-enabling the integration resolves the issue.

    Have looked at the home assistant logs but nothing is posted in there to explain the issue

    opened by salty2011 5
  • Current Temperature as its own sensor

    Current Temperature as its own sensor

    Problem Statement When using something like Dwains dashboard the current temperature is not display while AC unit is set to off, and when it is on it will display the desired temp instead of the current temp

    Possible Fix Not entirely sure, but perhaps the below

    • Move current_temperature attribute to its own sensor and make the attribute temperature
    • on the itc sensor rename temperature to target_temperature
    opened by brine0m 1
  • Set HVAC mode doesn't work if target mode is already current mode

    Set HVAC mode doesn't work if target mode is already current mode

    When trying to create automations I found that if you try to set the HVAC mode of an ITC to "off" when it is already "off" this can result in the ITC switching to auto.

    opened by MinimalMule 0
  • Push subscription seems to expire after a quantity of hrs

    Push subscription seems to expire after a quantity of hrs

    I haven't been able to calculate the exact duration, but if no command is sent from HA to AT4 and everything is idle, after 10-24hrs I stop receiving ITC temperature updates. As soon as I touch/adjust any parameter in HA, everything comes back to life again for another 10 or so hours.

    I've yet to check if during a time HA is not receiving updates, if I make a change within AT4 things come back to life again.

    Maybe we need a 6-hourly poll just to ensure things stay active? [edit] If the master 'AC' is turned on/off in HA, this does not trigger an update to the ITC states. A change to a zone is required for updates to start flowing in again.

    Screenshot 2021-12-03 092627

    opened by t1mb0 5
Releases(v.1.4.4)

  • v.1.4.4(Jul 15, 2022)

    Changes:

    • fixed bug that would disconnect the plugin very often and cause slowdowns
    • fixed bug that would add ITC battery to zones without batteries

    Enjoy! If you found this useful, say Thank You! with a beer.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.3(Jul 5, 2022)

    Changes:

    • added spill sensor and turbo sensor
    • added workaround for zones not updating temperatures

    It's been confirmed with Polyaire that there's an issue and update messages are not being sent when zones change temperatures. Current workaround is to ask for zone update messages every time there's an AC update message arriving, this should be every minute or so.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.2(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.1(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.0(Jun 28, 2022)

    Improvements:

    • Added ITC low battery as binary_sensor (On = low battery)
    • Allow damper setting to be readable while in ITC mode (Note: some cards might still allow to change the value; this will be ignored and a refresh will show the true value...)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3.2(Jun 28, 2022)

    Updated airtouch communication protocol to check for 1 address byte instead of 2 in message header. Should fix issues where some messages where ignored and entities in HA were not updated.

    Source code(tar.gz)
    Source code(zip)

  • v.1.3.1(Jun 24, 2022)

    Changes:

    • 1.3.1: allow more time to set up airtouch connection
    • 1.3.0: improvements in airtouch connection handling

    Note: starting with v.1.3, entities ids have been changed to include entity type. You need to change your cards, scripts and automations according to the new format:

    • AC unit: climate.[name] -> climate.ac_[name] (e.g. climate.ac_lg)
    • Damper: fan.[name] -> fan.damper_[name] (e.g. fan.damper_living)
    • ITC thermostat: climate.[name] -> climate.itc_[name] (e.g. climate.itc_master)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3(Jun 23, 2022)

  • v.1.2.3(Nov 6, 2021)

  • v.1.2.2(Nov 1, 2021)

  • v.1.2.1(Nov 1, 2021)

  • v.1.2.0(Oct 31, 2021)

  • v.1.1.2(Oct 30, 2021)

  • v.1.1.1(Oct 30, 2021)

  • v.1.1.0(Oct 30, 2021)

Owner
GitHub Repository
A circle of LEDs

This repository contains all the design files, production files and example code for a simple circular LED display.

Pim de Groot 15 Aug 21, 2022
A blender 2.9x addon for managing camera settings

TMG-Camera-Tools A blender 2.9x addon for managing camera settings Tutorial showcasing current features

Mainman002 12 Apr 16, 2022
A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler.

Env-MCRO A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler. (btw this image is a bit outdated, some of the silkscreen

EnviousData 68 Oct 14, 2022
circuitpython version of PyBasic for microcontrollers

cPyBasic Circuitpython version of PyBasic for microcontrollers Current version work only for Adafruit titano & CardKB for now. The origninal PyBasic w

BeBoXoS 3 Nov 14, 2021
A low power 1U Raspberry Pi cluster server for inexpensive colocation.

Raspberry Pi 1U Server There are server colocation providers that allow hosting a 1U server for as low as $30/month, but there's a catch: There are re

Paul Brown 627 Dec 31, 2022
iot-dashboard: Fully integrated architecture platform with a dashboard for Logistics Monitoring, Internet of Things.

Fully integrated architecture platform with a dashboard for Logistics Monitoring, Internet of Things. Written in Python. Flask applicati

2 Jul 29, 2022
This repository hosts the code for Stanford Pupper and Stanford Woofer, Raspberry Pi-based quadruped robots that can trot, walk, and jump.

This repository hosts the code for Stanford Pupper and Stanford Woofer, Raspberry Pi-based quadruped robots that can trot, walk, and jump.

Stanford Student Robotics 1.2k Dec 25, 2022
Smart Tech Automation Remote via Kinematics Gesture control for IoT devices

STARK Smart Tech Automation Remote via Kinematics Gesture control for IoT devices View Demo · Report Bug · Request Feature Table of Contents About The

Juseong (Joe) Kim 1 Jan 29, 2022
Tool to create 3D printable terrain with integrated path/road part files (Single material 3d printer)

BACKGROUND This has been an ongoing project of mine for a few months now. I run trails a lot and original the goal was to create a function to combine

9 Apr 26, 2022
LT-OCF: Learnable-Time ODE-based Collaborative Filtering, CIKM'21

LT-OCF: Learnable-Time ODE-based Collaborative Filtering Our proposed LT-OCF Our proposed dual co-evolving ODE Setup Python environment for LT-OCF Ins

Jeongwhan Choi 15 Dec 28, 2022
Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation

🤖 RoboCop 🤖 Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation Made by Clemente Donoso, 📍 Chile 🇨🇱 RoboCop Lateral Fron

Clemente Donoso Krauss 2 Jan 04, 2022
♟️ QR Code display for P4wnP1 (SSH, VNC, any text / URL)

♟️ Display QR Codes on P4wnP1 (p4wnsolo-qr) 🟢 QR Code display for P4wnP1 w/OLED (SSH, VNC, P4wnP1 WebGUI, any text / URL / exfiltrated data) Note: Th

PawnSolo 4 Dec 19, 2022
A Simple Python KeyLogger App

✨ Kurulum Uygulamayı bilgisayarınızda kullana bilmek için bazı işlemler yapmanız gerekiyor. Aşağıdaki yönlendirmeleri takip ederek bunu yapabilirsiniz

VorteX 7 Jun 11, 2022
Yet another automation project because a smart light is more than just on or off.

Automate home Yet another home automation project because a smart light is more than just on or off. Overview When talking about home automation there

Maja Massarini 62 Oct 10, 2022
KIRI - Keyboard Interception, Remapping, and Injection using Raspberry Pi as an HID Proxy.

KIRI - Keyboard Interception, Remapping and Injection using Raspberry Pi as a HID Proxy. Near limitless abilities for a keyboard warrior. Features Sim

Viggo Falster 10 Dec 23, 2022
raspberry pi servo control using pca9685

RPi_servo-control_pca9685 raspberry pi 180° servo control using pca9685 Requirements Requires you to have the adafruit servokit library installed You

1 Jan 10, 2022
Python library to interact with the GCE Electronics IPX800 device

A python library to control a GCE-Electronics IPX800 V4 device through its API.

Marc-Aurèle Brothier 2 Oct 20, 2021
Play music on Raspberry Pi Pico Without CPU involvement

MicroPython_PIO_Music_DMA Play music on Raspberry Pi Pico Without CPU involvement This is based on PIOBeep (https://github.com/benevpi/pico_pio_buzz)

3 Nov 27, 2022
A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost.

distance sensor cube timer A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost. How to

3 Feb 21, 2022
Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z

nissan_ecu_hacking Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z My goal

Liam Goss 11 Sep 24, 2022