♟️ QR Code display for P4wnP1 (SSH, VNC, any text / URL)

Overview

♟️ Display QR Codes on P4wnP1 (p4wnsolo-qr)

🟢 QR Code display for P4wnP1 w/OLED (SSH, VNC, P4wnP1 WebGUI, any text / URL / exfiltrated data)

Note: The script currently checks the WiFi (Client-mode) IP Address. I didn't add other IP addresses in yet (such as Ethernet Gadget IP Address, etc) because this is a work-in-progress, and the current version is more of a demo than anything.

  • This script package gives your P4wnP1 w/OLED screen the ability to generate and display QR Codes directly on the OLED screen. The intented purpose is to run this script when P4wnP1 boot up (see below for How to Run on Boot instructions).

  • This way you can see your P4wnP1's IP address automatically (and scan the QR Code with a phone) after P4wnP1 boots up, without having to do anything else. Ideally, this method of displaying (and optionally scanning) would save time in your workflow and make on-the-go operations faster & more plausible.

  • Additionally, I hope to add this into BeBoXGui / p4wnsolo-dashboard as a core component in a group of OLED display scripts.

Now for the real stuff:

Example of P4wnP1 showing QR Code to connect to Raspberry Pi via SSH:

Requirements:

🔵 Raspberry Pi (any model should work - Tested Dec 12 '21 on RPi 0 W running P4wnP1 ALOA)
🔵 1.3" OLED Hat (SH1106)
🔵 Luma.oled drivers installed

How to Install Luma & Luma OLED:

sudo pip3 install luma luma.oled

🔨 Usage:

Clone the repo

git clone https://github.com/p4wnsolo/p4wnsolo-qr.git

Change directories

cd p4wnsolo-qr

Launch the script

python3 p4wnsolo-qr.py -i spi --display sh1106

🚀 Optional: Start on Boot

First, we run this command to open the crontab edit screen:
crontab -e
Then move the cursor to the first empty line and Paste this:

@reboot sudo /usr/bin/python3 /root/p4wnsolo-qr.py &&

BEFORE YOU REBOOT: Just run a quick test to verify p4wnsolo-qr.py is actually in the filepath above (or change the line above).

How do I test the crontab entry before I reboot?

Test the crontab entry by running the command above (without the "@reboot" part or "&&" part) in the Command Line before rebooting. Ex:

sudo /usr/bin/python3 /path/to/file/p4wnsolo-qr.py

If running the command above launches the script successfully, then you can use that same command in crontab (with "@reboot" before and "&&" after)!
Note: If your OLED screen is already displaying something using Python, you'll have to kill that script before running P4wnSolo-QR so they don't fight for screen access:

pkill -f "yourScriptNameHere.py"

📷 Sample QR Code:

See the images in this Repo (p4wnsolo-qr-code-XYZ.jpg) or scroll down for example display screens.

🕷 Extra:

The default operating mode is ssh, which generates a QR Code to connect to Raspberry Pi via SSH. There's also a spiderfoot option, which generates a QR Code to connect to Spiderfoot server running on Raspberry Pi. The Spiderfoot feature has not yet been implemented (doesn't check to see if Spiderfoot is running). But if you want to see the "demo" of Spiderfoot QR Code mode, here's how:

  1. Open p4wnsolo-qr.py in text editor
  2. Near Line 25, you'll see something like this: ##### Set mode here
  3. Comment out the line that says themode = 'ssh'
  4. Uncomment the line that says themode = 'spiderfoot' In the works:
  • Add themode code entries for P4wnP1 WebGUI URL

📷 Screenshots

Generating QR Code for SSH

Displaying QR Code for SSH

Generating QR Code for Spiderfoot

Displaying QR Code for Spiderfoot

After Pressing + Button for More Time

File Requirements

These Files Must Be in the Same Folder as p4wnsolo-qr.py:
  • DroidSansMono.ttf - Font for small text on OLED screens
  • Prototype.ttf - Font for "Generating QR Code" screen
  • SH1106.py - Library for displaying things on SH1106 OLED screen
  • SH1106.pyc - Config file for ^
  • config.py - Config file
  • config.pyc - Config file
  • demo_opts.py - Config file

Thanks to

BeBoX

Rogan.Dawes

MaMe82

for the excellent work and inspiration

You might also like...
Create (templateable) cameras that display qr codes in homeassistant
Create (templateable) cameras that display qr codes in homeassistant

QRCam This custom component creates cameras displaying qrcodes. The QRCodes can be static or generated from templates. If you use a template as conten

 OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick
OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick

OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick. It can handle being the brains of your entire stick, or just handling the bells and whistles while your Brook board talks to your console.

Easyeda2kicad.py - Convert any LCSC components (including EasyEDA) to KiCad library

easyeda2kicad.py A Python script that convert any electronic components from LCSC or EasyEDA to a Kicad library Installation git clone https://github.

A python script for macOS to enable scrolling with the 3M ergonomic mouse EM500GPS in any application.

A python script for macOS to enable scrolling with the 3M ergonomic mouse EM500GPS in any application.

Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

Raspberry Pi Pico support for VS Code
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.
This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.

Notspot robot simulation - Python version This repository contains all the files and code needed to simulate the notspot quadrupedal robot using Gazeb

Simple Python script to decode and verify an European Health Certificate QR-code

A simple Python script to decode and verify an European Health Certificate QR-code.

Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z

nissan_ecu_hacking Python code written to utilize the Korlan usb2can hardware to send and receive data over the can-bus on a 2008 Nissan 350z My goal

Releases(alpha)
  • alpha(Dec 12, 2021)

Owner
PawnSolo
I was born in a factory and designed to p4wn
PawnSolo
Raspberry Pi & Accelerometer with Losant's EEA

Raspberry Pi & Accelerometer with Losant's EEA This is a repository that contains companion code to this EEA How To guide. Each folder is named accord

Losant 1 Oct 29, 2021
Testing out some (stolen) DMA code for RP2040 Micropython

RP2040_micropython_dma testing out some (stolen) DMA code for RP2040 Micropython. Heavy inspiration and some code from https://iosoft.blog/2021/10/26/

2 Dec 29, 2022
The PicoEMP is a low-cost Electromagnetic Fault Injection (EMFI) tool,

ChipSHOUTER-PicoEMP The PicoEMP is a low-cost Electromagnetic Fault Injection (EMFI) tool, designed specifically for self-study and hobbiest research.

NewAE Technology Inc. 312 Jan 07, 2023
Modeling and Simulation of Satellite Servicing Manipulators

Modeling and Simulation of Satellite Servicing Manipulators Final Project for the course ENPM662: Introduction to Robot Modeling (Fall 2021). This pro

Adarsh M 1 Jan 24, 2022
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

Alternative firmware for ESP8266/ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability

Theo Arends 59 Dec 26, 2022
Claussoft Personal Digital Assistant

Claussoft Personal Digital Assistant Install on Linux $ sudo apt update $ sudo apt install espeak ffmpeg libespeak1 portaudio19-dev $ pip install -r r

Christian Clauss 3 Dec 14, 2022
Python script: Enphase Envoy mqtt json for Home Assistant

A Python script that takes a real time stream from Enphase Envoy and publishes to a mqtt broker. This can then be used within Home Assistant or for other applications. The data updates at least once

29 Dec 27, 2022
A versatile program that uses the raspberry pi camera and provides it as a service

PiCameleon Is a daemon program meant to provide the RaspberryPi Camera as a service while running according to a configuration.

André Esser 52 Oct 16, 2022
Aqara Camera G3 integration for Home Assistant

Aqara Camera G3 integration for Home Assistant ATTENTION: The component only works after enabled telnet. Only supportd stream. Not support still image

14 Dec 18, 2022
Bucatini: a soft PIPE PHY for FPGA SerDes

Bucatini: a soft PIPE PHY for FPGA SerDes Bucatini is a noodly gateware layer capable of transforming an FPGA SerDes into a PIPE PHY, allowing you to

Great Scott Gadgets 28 Dec 02, 2022
Authentication provider using Synology DSM users for Home Assistant

Authentication provider using Synology DSM users for Home Assistant The Synology authentication provider lets you authenticate using the users in your

Sam Debruyn 5 Oct 06, 2022
This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC

About This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC, issue #56 and f

Philippe Teuwen 28 Nov 21, 2022
This is an incredible led matrix simulation using the ultimate mosaik co-simulation framework.

This project uses the mosaik co-simulation framework, developed by the brilliant developers at the high-ranked Offis institue for computer science, Oldenburg, Germany, to simulate multidimensional LE

Felix 1 Jan 28, 2022
This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too.

This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too. You just need an ELM327 USB or bluetooth device and

127 Jan 06, 2023
Designed and coded a password manager in Python with Arduino integration

Designed and coded a password manager in Python with Arduino integration. The Program uses a master user to login, and stores account data such as usernames and passwords to the master user. While lo

Noah Colbourne 1 Jan 16, 2022
Doughskript interpreter for converting simple command sequences into executable Arduino C++ code.

Doughskript interpreter for converting simple command sequences into executable Arduino C++ code.

Svjatoslav 2 Jan 11, 2022
Examples to accompany the

Examples to accompany the "Raspberry Pi Pico Python SDK" book published by Raspberry Pi Trading, which forms part of the technical documentation in support of Raspberry Pi Pico and the MicroPython po

Raspberry Pi 589 Jan 08, 2023
Python Wrapper for Homeassistant's REST API

HomeassistantAPI Python Wrapper for Homeassistant's REST API Please ⭐️ the repo if you find this project useful or cool! Here is a quick example. from

Nate 29 Dec 31, 2022
Home Assistant component to handle key atom

KeyAtome Home Assistant component to handle key atom, a Linky-compatible device made by Total/Direct-Energie. Installation Either use HACS (default),

18 Dec 21, 2022
Python implementation of ZMP Preview Control approach for biped robot control.

ZMP Preview Control This is the Python implementation of ZMP Preview Control app

Chaobin 24 Dec 19, 2022