What are the functions and applications of the smart counter control board?

Counting is a simple operation, and a counter is a circuit that makes this operation possible.The counter mainly counts the number of pulses, so as to achieve the purpose of measurement, counting, frequency division and control.The intelligent counter uses a full-chip packaging process with strong anti-interference ability. The intelligent counter control board developed by Muwo Technology has multiple output and control functions and counting modes, and is widely used in industrial production, electronic industry, metallurgy,Electricity, communication and other fields.

This smart counter control board has high counting accuracy and high cost performance; measuringIt has a wide range and can measure multiple parameters such as maximum value, minimum value and average value. It has the characteristics of fast measurement speed, strong anti-interference ability, high sensitivity, convenient operation and stable performance.Mainly have the following major functions:
1. The switch input function is used to control the purpose of clearing, adding and subtracting counting and locking.
2. 4.3-inch large touch screen design, easy to operate, can display data intuitively.
3. The single-chip microcomputer is used to drive the motor, reducing the structure of external devices and improving the reliability and utilization rate of the counter.
4. Alarm output function, when the count value reaches the upper limit, the counter stops counting immediately and outputs an alarm signal.
5. Install communication interface, support RS485 interface, remote bus communication, suitable for MODEM-BUS protocol.
6. Status output, there are 2 output modes, you can choose relay output or level output.
7. Using pulses for counter input, it can automatically identify forward and reverse movements.
8. It has the function of automatic reset and delay recovery.

Smart counters are generally divided into four types: general-purpose, microwave, computing and frequency counters.We are familiar with skipping rope counting, industry calibration testing, radar equipment and communication equipment measurement, electronic product production testing, component performance testing, etc.