H7-tool releases firmware v2 15. For offline recording, the full series SPI flash of Renesas, Hetai and is25wp are added (2022-04-14)

H7-TOOL Summary of all resources （ Including operation manual ）：

http://www.armbbs.cn/forum.php?mod=viewthread&tid=89934

PC Computer software ： upgrade PC Software to V2.1.5

h7toolPC_release(V2.1.5).zip (59.95MB)

【PC Software 】V2.1.5

1. Interface optimization
  - Signal generator D0-D9 Button to add mouse automatic prompt
  - When turning off the signal generator , On the front panel Check Button to synchronize updates
2. New offline burning chip
    Hetai HT32、 Reza RA series 、ISSI Of IS25 Serial FLASH
3. Offline burning new serial port control interface , It is convenient for the client's host to control the burner

【APP The firmware 】V2.15

1. solve bug. Serial port monitoring ,100.012 Format display ms It's not worth it
2. Analog signal generator increases 10mV gear
3. Fix old server address 61.160.223.136 distinguish bug, Can't automatically update new address
4. solve STM32L051 burn 2 File , Verification failure in some cases
5. Solve the problem that the serial port assistant occasionally displays garbled codes when printing Chinese characters . tool Synchronize the double bytes of Chinese characters and then transmit

【EMMC】V2.15

1. Add Hetai HT32 Serial chip burning
2. Add Reza RA Serial chip burning
3. increase ISSI Of IS25LP,IS25WP A full range SPI FLASH
4. Automatically release the read protection function , Some chip settings are not automatically unprotected by default .-1 Show no support for , Disable ,0 Indicates support, but does not release by default
5. STM32G0B1,G0B0, The default setting does not automatically release the read protection .
 

---

1、 Precautions for upgrading the new version

（1）APP and eMMC Independently upgraded ：

H7-TOOL new 2.x Firmware upgrade instructions （2022-02-24） - H7-TOOL development tool - Hardman embedded Forum - Powered by Discuz!

（2） Because it's closed WiFi Module internal power on automatic reconnection function , Access is controlled by the program WiFi hotspot , So after the upgrade, you need to update WiFi password . 

 

2、H7-TOOL Of 10 individual GPIO Simple control of input and output adds a display prompt .

TOOL Yes 10 individual GPIO,D0 To D9 It can be used for ordinary GPIO Use .

  Setup method ：

  Now add a hint , When the mouse is placed in the corresponding position, it will prompt ：

 

3、 Offline burn ：

Add Hetai HT32 Series offline burning

  Add Reza RA Series offline burning support

  increase ISSI Of IS25WP A full range SPI FLASH Offline burning support

 

4、 List of currently supported offline burning chips