nvidia-container-runtime
A modified version of runc adding a custom pre-start hook to all containers.
If environment variable NVIDIA_VISIBLE_DEVICES is set in the OCI spec, the hook will configure GPU access for the container by leveraging nvidia-container-cli from project libnvidia-container.
Usage example
# Setup a rootfs based on Ubuntu 16.04
cd $(mktemp -d) && mkdir rootfs
curl -sS http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04-core-amd64.tar.gz | tar --exclude 'dev/*' -C rootfs -xz
# Create an OCI runtime spec
nvidia-container-runtime spec
sed -i 's;"sh";"nvidia-smi";' config.json
sed -i 's;\("TERM=xterm"\);\1, "NVIDIA_VISIBLE_DEVICES=0";' config.json
# Run the container
sudo nvidia-container-runtime run nvidia_smi
Installation
Ubuntu distributions
- Install the repository for your distribution by following the instructions here.
- Install the
nvidia-container-runtimepackage:
sudo apt-get install nvidia-container-runtime
CentOS distributions
- Install the repository for your distribution by following the instructions here.
- Install the
nvidia-container-runtimepackage:
sudo yum install nvidia-container-runtime
Docker Engine setup
Do not follow this section if you installed the nvidia-docker2 package, it already registers the runtime.
To register the nvidia runtime, use the method below that is best suited to your environment.
You might need to merge the new argument with your existing configuration.
Systemd drop-in file
sudo mkdir -p /etc/systemd/system/docker.service.d
sudo tee /etc/systemd/system/docker.service.d/override.conf <<EOF
[Service]
ExecStart=
ExecStart=/usr/bin/dockerd --host=fd:// --add-runtime=nvidia=/usr/bin/nvidia-container-runtime
EOF
sudo systemctl daemon-reload
sudo systemctl restart docker
Daemon configuration file
sudo tee /etc/docker/daemon.json <<EOF
{
"runtimes": {
"nvidia": {
"path": "/usr/bin/nvidia-container-runtime",
"runtimeArgs": []
}
}
}
EOF
sudo pkill -SIGHUP dockerd
You can optionally reconfigure the default runtime by adding the following to /etc/docker/daemon.json:
"default-runtime": "nvidia"
Command line
sudo dockerd --add-runtime=nvidia=/usr/bin/nvidia-container-runtime [...]
Environment variables (OCI spec)
Each environment variable maps to an command-line argument for nvidia-container-cli from libnvidia-container.
These variables are already set in our official CUDA images.
NVIDIA_VISIBLE_DEVICES
This variable controls which GPUs will be made accessible inside the container.
Possible values
0,1,2,GPU-fef8089b…: a comma-separated list of GPU UUID(s) or index(es).all: all GPUs will be accessible, this is the default value in our container images.none: no GPU will be accessible, but driver capabilities will be enabled.voidor empty or unset:nvidia-container-runtimewill have the same behavior asrunc.
Note: When running on a MIG capable device, the following values will also be available:
0:0,0:1,1:0,MIG-GPU-fef8089b/0/1…: a comma-separated list of MIG Device UUID(s) or index(es).
Where the MIG device indices have the form <GPU Device Index>:<MIG Device Index> as seen in the example output:
$ nvidia-smi -L
GPU 0: Graphics Device (UUID: GPU-b8ea3855-276c-c9cb-b366-c6fa655957c5)
MIG Device 0: (UUID: MIG-GPU-b8ea3855-276c-c9cb-b366-c6fa655957c5/1/0)
MIG Device 1: (UUID: MIG-GPU-b8ea3855-276c-c9cb-b366-c6fa655957c5/1/1)
MIG Device 2: (UUID: MIG-GPU-b8ea3855-276c-c9cb-b366-c6fa655957c5/11/0)
NVIDIA_MIG_CONFIG_DEVICES
This variable controls which of the visible GPUs can have their MIG configuration managed from within the container. This includes enabling and disabling MIG mode, creating and destroying GPU Instances and Compute Instances, etc.
Possible values
all: Allow all MIG-capable GPUs in the visible device list to have their MIG configurations managed.
Note:
- This feature is only available on MIG capable devices (e.g. the A100).
- To use this feature, the container must be started with
CAP_SYS_ADMINprivileges. - When not running as
root, the container user must have read access to the/proc/driver/nvidia/capabilities/mig/configfile on the host.
NVIDIA_MIG_MONITOR_DEVICES
This variable controls which of the visible GPUs can have aggregate information about all of their MIG devices monitored from within the container. This includes inspecting the aggregate memory usage, listing the aggregate running processes, etc.
Possible values
all: Allow all MIG-capable GPUs in the visible device list to have their MIG devices monitored.
Note:
- This feature is only available on MIG capable devices (e.g. the A100).
- To use this feature, the container must be started with
CAP_SYS_ADMINprivileges. - When not running as
root, the container user must have read access to the/proc/driver/nvidia/capabilities/mig/monitorfile on the host.
NVIDIA_DRIVER_CAPABILITIES
This option controls which driver libraries/binaries will be mounted inside the container.
Possible values
compute,video,graphics,utility…: a comma-separated list of driver features the container needs.all: enable all available driver capabilities.- empty or unset: use default driver capability:
utility,compute.
Supported driver capabilities
compute: required for CUDA and OpenCL applications.compat32: required for running 32-bit applications.graphics: required for running OpenGL and Vulkan applications.utility: required for usingnvidia-smiand NVML.video: required for using the Video Codec SDK.display: required for leveraging X11 display.
NVIDIA_REQUIRE_*
A logical expression to define constraints on the configurations supported by the container.
Supported constraints
cuda: constraint on the CUDA driver version.driver: constraint on the driver version.arch: constraint on the compute architectures of the selected GPUs.brand: constraint on the brand of the selected GPUs (e.g. GeForce, Tesla, GRID).
Expressions
Multiple constraints can be expressed in a single environment variable: space-separated constraints are ORed, comma-separated constraints are ANDed.
Multiple environment variables of the form NVIDIA_REQUIRE_* are ANDed together.
NVIDIA_DISABLE_REQUIRE
Single switch to disable all the constraints of the form NVIDIA_REQUIRE_*.
NVIDIA_REQUIRE_CUDA
The version of the CUDA toolkit used by the container. It is an instance of the generic NVIDIA_REQUIRE_* case and it is set by official CUDA images. If the version of the NVIDIA driver is insufficient to run this version of CUDA, the container will not be started.
Possible values
cuda>=7.5,cuda>=8.0,cuda>=9.0…: any valid CUDA version in the formmajor.minor.
CUDA_VERSION
Similar to NVIDIA_REQUIRE_CUDA, for legacy CUDA images.
In addition, if NVIDIA_REQUIRE_CUDA is not set, NVIDIA_VISIBLE_DEVICES and NVIDIA_DRIVER_CAPABILITIES will default to all.
Issues and Contributing
Checkout the Contributing document!
- Please let us know by filing a new issue
- You can contribute by opening a pull request
87 Sep 13, 2022
26 Nov 20, 2022
1 Oct 05, 2022
29 Nov 09, 2022
20 Aug 17, 2022
191 Dec 22, 2022
42 Dec 30, 2022
229 Dec 17, 2022
328 Dec 30, 2022
16 Aug 30, 2022
220 Dec 31, 2022
3 Dec 23, 2021
251 Dec 17, 2022
2 Mar 24, 2022
1.7k Dec 29, 2022
79 Oct 08, 2022
4 Dec 15, 2022
12 Aug 04, 2022
36 Nov 23, 2022
14 Feb 19, 2022