An emulated LED scoreboard for Major League Baseball ⚾

Overview

mlb-led-scoreboard-emulated

An LED scoreboard for Major League Baseball. Displays a live scoreboard for your team's game on that day.

Be sure to check out the original repo, mlb-led-scoreboard, if you'd like to run this on a Rasperry Pi LED panel!

Currently supported boards:

  • 32x32
  • 64x32
  • 64x64
  • 128x32
  • 128x64

If you'd like to see support for another set of board dimensions, file an issue!

Table of Contents

Screenshots

screenshot

Installation

Requirements

You need Git for cloning this repo and PIP for installing the scoreboard software.

sudo apt-get update
sudo apt-get install git python-pip

Installing the scoreboard software

# Windows
./install.sh

# Mac/Linux
sh ./install.sh

It will also install the following python libraries that are required for certain parts of the scoreboard to function.

  • pytz, tzlocal: Timezone libraries. These allow the scoreboard to convert times to your local timezone
  • feedparser: Used to fetch and parse RSS feeds. The scoreboard uses this to show news headlines.
  • pyowm: OpenWeatherMap API interactions. We use this to get the local weather for display on the offday screen. For more information on how to finish setting up the weather, visit the weather section of this README.
  • mlbgame: The main library that fetches and parses all of the actual MLB data being displayed.
  • RGBMatrixEmulator, a drop-in replacement for rpi-rgb-led-matrix which is normally used to drive LED displays on Raspberry Pi.

Updating

  • Re-run the install file. Run the above install command again. Any additional dependencies that were added with the update will be installed this way. If you are moving to a new major release version, answer "Y" to have it make you a new config file.
  • Check your custom layout/color files if you made any. There's a good chance some new keys were added to the layout and color files. These changes should just merge right in with the customized .json file you have but you might want to look at the new .json.example files and see if there's anything new you want to customize.

That should be it! Your latest version should now be working with whatever new fangled features were just added.

Usage

python main.py

See the Flags section below for more flags you can optionally provide.

Configuration

There are two config files associated with the scoreboard.

The first (config.json) controls the scoreboard option. A default config.json.example file is included for reference. Copy this file to config.json and modify the values as needed.

"preferred":                           Options for team and division preference
  "teams"                      Array   Pass an array of preferred teams. The first team in the list will be used as your 'favorite' team. Example: ["Cubs", "Brewers"]
  "divisions"                  Array   Pass an array of preferred divisions that will be rotated through in the order they are entered. Example: ["NL Central", "AL Central"]

"news_ticker":                         Options for displaying a nice clock/weather/news ticker screen
  "always_display"             Bool    Display the news ticker screen at all times (supercedes the standings setting)
  "team_offday"                Bool    Display the news ticker when your prefered team is on an offday
  "preferred_teams"            Bool    Include headlines from your list of preferred teams. Will only use the first 3 teams listed in your preferred teams
  "traderumors"                Bool    Include headlines from mlbtraderumors.com for your list of preferred teams. Will only use the first 3 teams listed in your preferred teams
  "mlb_news"                   Bool    Include MLB's frontpage news
  "countdowns"                 Bool    Include various countdowns in the ticker.
  "date"                       Bool    Display today's date to start the ticker. This will always be enabled if no other ticker options are.
  "date_format"                String  Display the date with a given format. You can check all of the date formatting options at [strftime.org](strftime.org)

"standings":                           Options for displaying standings for a division
  "always_display"             Bool    Display standings for the provided preferred_divisions.
  "mlb_offday"                 Bool    Display standings for the provided preferred_divisions when there are no games on the current day.
  "team_offday"                Bool    Display standings for the provided preferred_divisions when the preferred_teams is not playing on the current day.

"rotation":                            Options for rotation through the day's games
  "enabled"                    Bool    Rotate through each game of the day every 15 seconds.
  "scroll_until_finished"      Bool    If scrolling text takes longer than the rotation rate, wait to rotate until scrolling is done.
  "only_preferred"             Bool    Only rotate through games in your preferred_teams list.
  "rates"                      Dict    Dictionary of Floats. Each type of screen can use a different rotation rate. Valid types: "live", "pregame", "final".
                               Float   A Float can be used to set all screen types to the same rotate rate.

  "while_preferred_team_live":         Options for rotating while your chosen preferred_teams is live
    "enabled"                  Bool    Rotation is enabled while your configured preferred_teams game is live.
    "during_inning_breaks"     Bool    Rotation is enabled while your configured preferred_teams game is live during an inning break.

"weather":                             Options for retrieving the weather
  "apikey"                     String  An API key is requires to use the weather service. You can get one for free at [Open Weather Map](https://home.openweathermap.org/users/sign_up).
  "zipcode"                    String  The zipcode/postcode for the location you wish to receive weather data
  "country"                    String  The ISO 3166 country code associated with the zipcode
  "metric_units"               Bool    Set true for celsius and meters/s. Set false for fahrenheit and miles per hour.

"time_format"                  String  Sets the preferred hour format for displaying time. Accepted values are "12h" or "24h" depending on which you prefer.
"end_of_day"                   String  A 24-hour time you wish to consider the end of the previous day before starting to display the current day's games. Uses local time from your pi.
"full_team_names"              Bool    If true and on a 64-wide board, displays the full team name on the scoreboard instead of their abbreviation. This config option is ignored on 32-wide boards. Defaults to true when on a 64-wide board.
"scrolling_speed"              Integer Supports an integer between 0 and 4. Sets how fast the scrolling text scrolls.
"debug"                        Bool    Game and other debug data is written to your console.
"demo_date"                    String  A date in the format YYYY-MM-DD from which to pull data to demonstrate the scoreboard. A value of `false` will disable demo mode.

You may also configure the emulator options via emulator_config.json (an example file is included as reference).

"pixel_size"                   Integer The size of the LED pixel in screen pixels (default: 10)
"pixel_style"                  String  The style of the LED pixel, can be either "square" or "circle" (default: "circle")

Flags

You can configure your LED matrix with the same flags used in the rpi-rgb-led-matrix library. More information on these arguments can be found in the library documentation.

--led-rows                Display rows. 16 for 16x32, 32 for 32x32. (Default: 32)
--led-cols                Panel columns. Typically 32 or 64. (Default: 32)
--led-chain               Daisy-chained boards. (Default: 1)
--led-parallel            For Plus-models or RPi2: parallel chains. 1..3. (Default: 1)
--led-pwm-bits            Bits used for PWM. Range 1..11. (Default: 11)
--led-brightness          Sets brightness level. Range: 1..100. (Default: 100)
--led-gpio-mapping        Hardware Mapping: regular, adafruit-hat, adafruit-hat-pwm
--led-scan-mode           Progressive or interlaced scan. 0 = Progressive, 1 = Interlaced. (Default: 1)
--led-pwm-lsb-nanosecond  Base time-unit for the on-time in the lowest significant bit in nanoseconds. (Default: 130)
--led-show-refresh        Shows the current refresh rate of the LED panel.
--led-slowdown-gpio       Slow down writing to GPIO. Range: 0..4. (Default: 1)
--led-no-hardware-pulse   Don't use hardware pin-pulse generation.
--led-rgb-sequence        Switch if your matrix has led colors swapped. (Default: RGB)
--led-pixel-mapper        Apply pixel mappers. e.g Rotate:90, U-mapper
--led-row-addr-type       0 = default; 1 = AB-addressed panels. (Default: 0)
--led-multiplexing        Multiplexing type: 0 = direct; 1 = strip; 2 = checker; 3 = spiral; 4 = Z-strip; 5 = ZnMirrorZStripe; 6 = coreman; 7 = Kaler2Scan; 8 = ZStripeUneven. (Default: 0)

Personalization

If you're feeling adventurous (and we highly encourage it!), the sections below outline how you can truly personalize your scoreboard and make it your own!

Custom Board Layout

You have the ability to customize the way things are placed on the board (maybe you would prefer to see scrolling text for a pregame a bit higher or lower). See the ledcoords/ directory for more information.

Custom Colors

You have the ability to customize the colors of everything on the board. See the ledcolors/ directory for more information.

Weather

This scoreboard will use a weather API to gather weather information at various times. This information is displayed on your teams offdays for your area and also displayed during each game's pregame information. The weather API we use is from OpenWeatherMaps. OpenWeatherMaps API requires an API key to fetch this data so you will need to take a quick minute to sign up for an account and copy your own API key into your config.json.

You can find the signup page for OpenWeatherMaps at https://home.openweathermap.org/users/sign_up. Once logged in, you'll find an API keys tab where you'll find a default key was already created for you. You can copy this key and paste it into the conig.json under "weather", "apikey".

You can change the location used by entering your city, state, and country code separated by commas. If you wish to use metric measurments, set the "metric" option to true.

Sources

This project relies on two libraries: MLBGame is the Python library used for retrieving live game data. RGBMatrixEmulator, a drop-in replacement for rpi-rgb-led-matrix which is normally used to drive LED displays on Raspberry Pi.

Accuracy Disclaimer

The scoreboard is dependent on MLB having their data correct and up to date. If you see any weird data such as wrong pitches or scores or whatever else, MLB is drunk.

Help and Contributing

If you run into any issues and have steps to reproduce, open an issue. If you have a feature request, open an issue. If you want to contribute a small to medium sized change, open a pull request. If you want to contribute a new feature, open an issue first before opening a PR.

Latest Features

The scoreboard follows semantic versioning, for what makes sense for a project like this (it has no consumable API or anything like that). The master branch is always kept clean and never updated except for releases. If you want to contribute, make sure your pull request is pointed to dev.

Licensing

This fork is released under the original author's license:

This project as of v1.1.0 uses the GNU Public License. If you intend to sell these, the code must remain open source.

https://github.com/MLB-LED-Scoreboard/mlb-led-scoreboard#licensing

Owner
Tyler Porter
Rails Developer | Raspberry Pi Enthusiast | Human Person
Tyler Porter
Rasberry Pie GPIO memory game. Press the corresponding key to the lit LED.

RPie-keyboard-game Rasberry Pie GPIO memory game. Press the corresponding key to the lit LED. Randem LED (general output) is lit up on rasberrypi rand

Shawn Dowling 1 Oct 24, 2021
A install script for installing qtile and my configs on Raspberry Pi OS

QPI OS - Qtile + Raspberry PI OS Qtile + Raspberry Pi OS :) Installation Run this command in the terminal

RPICoder 3 Dec 19, 2021
2021 Real Robot Challenge Phase2 attemp

Real_Robot_Challenge_Phase2_AE_attemp We(team name:thriftysnipe) are the first place winner of Phase1 in 2021 Real Robot Challenge. Please see this pa

Qiang Wang 2 Nov 15, 2021
3d printable macropad

Pico Mpad A 3D printable macropad for automating frequently repeated actions. Hardware To build this project you need access to a 3d printer. The mode

Dmytro Panin 94 Jan 07, 2023
A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost.

distance sensor cube timer A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost. How to

3 Feb 21, 2022
Parametric open source reconstructions of Voron printed parts

The Parametric Voron This repository contains Fusion 360 reconstructions of various printed parts from the Voron printers

Matthew Lloyd 26 Dec 19, 2022
This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC

About This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC, issue #56 and f

Philippe Teuwen 28 Nov 21, 2022
Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms.

Robo Arm :: Rigging Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms. It construct serial links(a kind

2 Nov 18, 2021
This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction.

Structured-light-stereo This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction. . How to use: STEP 1:

FEI 20 Dec 31, 2022
Extremely simple PyBadge examples to demonstrate different aspects of CircuitPython using PyBadge hardware.

BeginnerPyBadge I purchased a PyBadge recently. I'm new to hardware. I was surprised how hard it was to find easy examples demonstrating how different

Rubini LaForest 2 Oct 21, 2021
Example code to sending USB Gadget multimedia keys via Python

Send Multimedia USB HID Keys via Python As an USB Gadget in Linux This gives a simple script with zero dependencies that can easily run on any Linux d

DevOps Nirvana 2 Jan 02, 2023
A LiteX project which builds a SoC with DRAM / HDIM output via the GPDI SYZYGY addon.

ButterStick GPDI LiteX demo A LiteX project which builds a SoC with DRAM / HDIM output via the GPDI SYZYGY addon. Getting started Connect GPDI board t

4 Nov 21, 2021
Programming of Robotics Systems course at the University of Aveiro, Portugal, 2021-2022.

Programação de Sistemas Robóticos Miguel Riem Oliveira Universidade de Aveiro 2021-2022 Projeto AtlasCar Projecto RACE IROS 2014 AtlasCar2 ATOM IROS 2

Miguel Riem de Oliveira 22 Jul 13, 2022
Turn your Raspberry Pi Pico into a USB Rubber Ducky

pico-ducky Turn your Raspberry Pi Pico into a USB Rubber Ducky Install Requirements CircuitPython for the Raspberry Pi Pico adafruit-circuitpython-bun

Konstantinos 5 Nov 08, 2022
A versatile program that uses the raspberry pi camera and provides it as a service

PiCameleon Is a daemon program meant to provide the RaspberryPi Camera as a service while running according to a configuration.

André Esser 52 Oct 16, 2022
A iot Bike sytem based on RaspberryPi, Ardiuino

Cyclic 's Kernel ---- A iot Bike sytem based on RaspberryPi, Ardiuino, etc 0x1 What is This? Cyclic 's Kernel is an independent System With self-produ

Retr0mous 2 Oct 09, 2022
Uses the Duke Energy Gateway to import near real time energy usage into Home Assistant

Duke Energy Gateway This is a custom integration for Home Assistant. It pulls near-real-time energy usage from Duke Energy via the Duke Energy Gateway

Michael Meli 28 Dec 23, 2022
Poupool is an overflow swimming pool control software

Poupool - The swimming pool controller Poupool is a swimming pool control software. It is based on Transitions, Pykka and Paho MQTT. The user interfac

Cyril Jaquier 8 Jul 18, 2022
Skykettle ha - Redmond SkyKettle integration for Home Assistant

Redmond SkyKettle integration for Home Assistant This integration allows to cont

Alexey 'Cluster' Avdyukhin 48 Jan 06, 2023
Simple Microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi

REST-light is a simple microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi. The main usage is an easy integration of 433M

Pascal Höhnel 1 Jan 09, 2022