Poupool is an overflow swimming pool control software

Overview

Poupool - The swimming pool controller

Build Status codecov

Poupool is a swimming pool control software.

It is based on Transitions, Pykka and Paho MQTT. The user interface is built using the excellent home automation server openHAB. Though, any MQTT client could be used to interact with the system.

The swimming pool

This is meant as a personal project and will likely never be a fully-featured software. However, it would be awesome to see it running somewhere else. Poupool runs on a Raspberry Pi 3 Model B and most of the hardware is COTS (commercial off-the-shelf). If you want more information, feel free to contact me.

Originally, I wanted to experiment with asyncio but finally chose to go with some more traditional approach (actor model and finite state machines).

Poupool currently controls filtration (including backwash), heating (heat pump), pH and chlorination, cover, lights and all the pumps and valves of the system. It is used for an overflow swimming pool so that adds some complexity to the control process (e.g. monitoring of the retention tank water level).

The main interaction with the system is done through modes. Here are some of the main ones:

  • eco : cover close, filtration, pH, chlorination and heating are automatic
  • standby : cover open, no overflow
  • overflow : cover open, overflow, chlorination is forced
  • comfort : cover open, no overflow, heating is forced

Several other features are available like a wintering state stiring the pool to avoid as long as possible to have the water freezing, a stiring feature when the cover is closed to dissipate the heat forming just under the cover, the control of a swimming pump and more.

Here is a screenshot of the main menu in openHAB 2.5M1:

openHAB main menu

Of course, you can use the iOS or Android openHAB clients, write your own HABPanel interface or even use the REST API provided by openHAB.

Dependencies

These are the external dependencies that can be install via pip. You will also need Python 3.5. Best is to setup a virtual environment.

Frameworks:

  • Pykka
  • transitions
  • paho-mqtt
  • astral

Raspberry Pi:

  • RPi.GPIO
  • adafruit-circuitpython-ads1x15
  • adafruit-circuitpython-mcp4725

User interface:

  • openHAB 2.5

Development tools:

  • autopep8
  • pytest
Owner
Cyril Jaquier
Cyril Jaquier
Real-time Coastal Monitoring at the University of Hawaii at Manoa

Coastal Monitoring at the University of Manoa Source code for Beaglebone/RPi-based data loggers, shore internet gateways, and web server. Software dev

Stanley Lio 7 Dec 07, 2021
DOS-like OS for RP2040 basic microcontroller boards

Micropython DOS-like OS for RP2040 microcontroller boards. Check out the demo video at https://www.youtube.com/watch?v=Az_oiq8GE4Y To start the OS typ

RetiredWizard 58 Dec 27, 2022
Raspberry Pi Pico and LoRaWAN from CircuitPython

Raspberry Pi Pico and LoRaWAN from CircuitPython Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040-based board using CircuitPython

Alasdair Allan 15 Oct 08, 2022
LedFx is a network based LED effect controller with support for advanced real-time audio effects

Welcome to LedFx ✨ -Making music come alive! LedFx website: https://ledfx.app/ What is LedFx? What LedFx offers is the ability to take audio input, an

786 Jan 02, 2023
iot-dashboard: Fully integrated architecture platform with a dashboard for Logistics Monitoring, Internet of Things.

Fully integrated architecture platform with a dashboard for Logistics Monitoring, Internet of Things. Written in Python. Flask applicati

2 Jul 29, 2022
PyLog - Simple keylogger that uses pynput to listen to keyboard input.

Simple keylogger that uses pynput to listen to keyboard input. Outputs to a text file and the terminal. Press the escape key to stop.

1 Dec 29, 2021
A iot Bike sytem based on RaspberryPi, Ardiuino

Cyclic 's Kernel ---- A iot Bike sytem based on RaspberryPi, Ardiuino, etc 0x1 What is This? Cyclic 's Kernel is an independent System With self-produ

Retr0mous 2 Oct 09, 2022
Using a raspberry pi, we listen to the coffee machine and count the number of coffee consumption

A typical datarootsian consumes high-quality fresh coffee in their office environment. The board of dataroots had a very critical decision by the end of 2021-Q2 regarding coffee consumption.

dataroots 51 Nov 21, 2022
2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

A number of 2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

Arghya Chatterjee 5 Nov 05, 2022
Water quality integration for Home Assistant with data provided by Budapest FVM

Water Quality FVM (Budapest, HU) custom integration for Home Assistant This custom component integrates water quality information provided by Budapest

Atticus Maximus 3 Dec 23, 2021
This allows you to record keyboard and mouse input, and play it back using pynput.

Record and Play with Python! This allows you to record keyboard and mouse input, and play it back (with looping) using pynput. It allows for automatio

George Jensen 45 Jan 02, 2023
A python script for Homeassistant that counts down the days to birthdays, anniversaries etc

Date Countdown A python script for Homeassistant that counts down the days to birthdays, anniversaries etc Important note I no longer use homeassistan

Marc Forth 21 Mar 12, 2022
Drobo Status is a python program that will connect to your Drobo and return JSON data regarding your Drobo

This is a simple python script that will run a docker container to pull data from Drobo. It will give information like (Name, serial, firmware, disk-total, disk-used, disk-free and individual disk st

Biofects 1 Jan 15, 2022
This Home Assistant custom component adds support for controlling Midea dehumidiferes on local network.

This is a custom component for Home assistant that adds support for Midea dehumidifier appliances via the local area network. midea-dehumidifier-lan H

Nenad Bogojevic 97 Jan 08, 2023
Blender Camera Switcher

Blender Camera Switcher A simple camera switcher addon for blender. Useful when use reference image for camera. This addon will automatically fix the

Corgice 1 Jan 31, 2022
a library for using WS2812b leds (aka neopixels) with Raspberry Pi Pico

pico_ws2812b a library for using WS2812b leds (aka neopixels) with Raspberry Pi Pico You'll first need to save the ws2812b.py file to your device (for

76 Nov 25, 2022
Claussoft Personal Digital Assistant

Claussoft Personal Digital Assistant Install on Linux $ sudo apt update $ sudo apt install espeak ffmpeg libespeak1 portaudio19-dev $ pip install -r r

Christian Clauss 3 Dec 14, 2022
A set of postprocessing scripts and macro to accelerate the gyroid infill print speed with Klipper

A set of postprocessing scripts and macro to accelerate the gyroid infill print speed with Klipper

Jérôme W. 75 Jan 07, 2023
Watson-Assistant with integration capabilities

Watson-Assistant-Integration Watson-Assistant with integration capabilities "main.py" should be deployed as Cloud Function (Action) on IBM Cloud. For

Sergey Usachev 1 Dec 20, 2021
Pure micropython ESP32 SPI driver for sdcard and screen at the same SPI bus

micropython-esp32-spi-sdcard-and-screen-driver Proof of concept of Pure micropython espidf SPI driver for sdcard with screen at the same SPI bus (exam

Thomas Favennec 7 Mar 14, 2022