xcode armv6 armv7 armv7s arm64

 之前每个版本的ipa包打出来都才20M出头，后来不知道从哪个版本起打的包每次都将近40M，但是工程中也没有明显的增加很大第三方类或者图

片、静态文件。于是就开始了各种瘦身计划：压缩图片，删除不必要静态库。做了一番改动后发现包只比原来小了1M多，收效甚微。后来听同事说了

armv6 armv7 armv7s arm64引起编译包翻倍增大的问题，于是就试了一下，果然ipa包又回到了以前的大小。下边来说一下关于ios这个指令集(一下内容

引子DevDiv社区jas，内容稍有修改)。

目前ios的指令集有以下几种：

• armv6

• iPhone
• iPhone2
• iPhone3G
• 第一代和第二代iPod Touch

• armv7

• iPhone4
• iPhone4S

• armv7s

• iPhone5
• iPhone5C

• arm64

• iPhone5S

机器对指令集的支持是向下兼容的，因此armv7的指令集是可以运行在iphone5S的，只是效率没那么高而已~

在xcodeTARGETS里边Architectures:

Architecture ： 指你想支持的指令集。

Valid architectures : 指即将编译的指令集。

Build Active Architecture Only : 只是否只编译当前适用的指令集。

================================================

现在是2014年初，其实4和4S的用户还是蛮多的，而iphone3之类的机器几乎没有了，所以我们的指令集最低必须基于armv7.

因此,Architecture的值选择：armv7 armv7s arm64

PS:选arm64时需要最低支持5.1.1:

Convert Your App to a 64-Bit Binary After Updating It for iOS 7

Xcode 5.0.1 can build your app with both 32-bit and 64-bit binaries included. This combined binary requires a minimum deployment target of iOS 5.1.1 or later. The 64-bit binary runs only on 64-bit devices running iOS 7.0.3 and later. If you have an existing app, you should first update your app for iOS 7 and then port it to run on 64-bit processors. By updating it first for iOS 7, you can remove deprecated code paths and use modern practices. If you’re creating a new app, target iOS 7 and compile 32-bit and 64-bit versions of your app.

The architecture for 64-bit apps on iOS is almost identical to the architecture for OS X apps, making it easy to create a common code base that runs in both operating systems. Converting a Cocoa Touch app to 64-bit follows a similar transition process as the one for Cocoa apps on OS X. Pointers and some common C types change from 32 bits to 64 bits. Code that relies on the NSInteger and CGFloat

Start by building the app for the 64-bit runtime, fixing any warnings that occur as well as searching your code for specific 64-bit issues. For example:

• Make sure all function calls have a proper prototype.
• Avoid truncating 64-bit values by accidentally assigning them to a 32-bit data type.
• Ensure that calculations are performed correctly in the 64-bit version of your app.
• Create data structures whose layouts are identical in the 32-bit and 64-bit versions of your app (such as when you write a data file to iCloud).

1，如果想自己的app在各个机器都能够最高效率的运行，则需要将Build Active Architecture Only改为NO,Valid architectures选择对应的指令集：armv7 armv7s arm64。这个会为各个指令集编译对应的代码，因此最后的 ipa体积基本翻了3倍,Release版本必须NO。

2，如果想让app体积保持最小，则现阶段应该选择Valid architectures为armv7,这样Build Active Architecture Only选YES或NO就无所谓了