当前位置:网站首页>BoredApeYachtClub 无聊猿-NFT 源码解析第一节

BoredApeYachtClub 无聊猿-NFT 源码解析第一节

2022-08-11 05:18:00 Nolan Mace

BoredApeYachtClub 无聊猿

BoredApeYachtClub无聊猿NFT智能合约包含多个contract:

在这里插入图片描述

首先来看 contract BoredApeYachtClub:该合约继承ERC721以及Ownable 合约,是无聊猿NFT的主体合约。

    //BAYC起源地
    string public BAYC_PROVENANCE = "";

    //起始区块位置,用于记录合约起始的区块值 block.number
    uint256 public startingIndexBlock;

    //起始编号 
    uint256 public startingIndex;

    // 铸造每个APE 最小单位费用
    uint256 public constant apePrice = 80000000000000000; //0.08 ETH

    //每次最大铸造数量20
    uint public constant maxApePurchase = 20;

    //最大的数量
    uint256 public MAX_APES;

    //是否可出售状态
    bool public saleIsActive = false;

    //可铸造的时间
    uint256 public REVEAL_TIMESTAMP;
    
     //构造函数,智能合约创建时,进行初始化。由于本合约继承了ERC721 所以初始化ERC721的构造函数  Ownable是抽象类abstract 则不需要
    constructor(string memory name, string memory symbol, uint256 maxNftSupply, uint256 saleStart) ERC721(name, symbol) {
        //设置最大供应量
        MAX_APES = maxNftSupply;

        //设置可mint时间,mint时间必须大于等于REVEAL_TIMESTAMP
        REVEAL_TIMESTAMP = saleStart + (86400 * 9);
    }

    // withdraw函数 返还地址的以太坊
    // onlyOwner 只允许合约部署地址调用该方法
    // payable 表示该方法能够使用transfer 和 send 发送以太坊 
    function withdraw() public onlyOwner payable {
        //获取当前合约账户余额 
        uint balance = address(this).balance;
        //发送wei 到 msg.sender地址
        msg.sender.transfer(balance);
    }

    /**
     * Set some Bored Apes aside
     * 获取一些新的ape NFT 这里给定该方法每次生成30个新BAYC
     */
    function reserveApes() public onlyOwner {        
        //获取当前总供给量
        uint supply = totalSupply();
        //mint 30个新的BAYC
        uint i;
        for (i = 0; i < 30; i++) {
            _safeMint(msg.sender, supply + i);
        }
    }

    /**
     * DM Gargamel in Discord that you're standing right behind him.
     *设置可铸造时间  
     *onlyOwner 只允许合约部署地址调用该方法
     */
    function setRevealTimestamp(uint256 revealTimeStamp) public onlyOwner {
        REVEAL_TIMESTAMP = revealTimeStamp;
    } 

    /*     
    * Set provenance once it's calculated
    * 设置起源地HASH值
    */
    function setProvenanceHash(string memory provenanceHash) public onlyOwner {
        BAYC_PROVENANCE = provenanceHash;
    }
    /**设置URL */
    function setBaseURI(string memory baseURI) public onlyOwner {
        _setBaseURI(baseURI);
    }

    /*
    * Pause sale if active, make active if paused
    * 改变可售卖状态  
    * onlyOwner 只允许合约部署地址调用该方法
    */
    function flipSaleState() public onlyOwner {
        saleIsActive = !saleIsActive;
    }

    /**
    * Mints Bored Apes
    * 铸造 APE NFT
    */
    function mintApe(uint numberOfTokens) public payable {
        // 售卖状态需要开启
        require(saleIsActive, "Sale must be active to mint Ape");
        
        // 铸造数量必须小于等于20
        require(numberOfTokens <= maxApePurchase, "Can only mint 20 tokens at a time");
        
        // 增加铸造的数量必须小于 MAX_APEs
        require(totalSupply().add(numberOfTokens) <= MAX_APES, "Purchase would exceed max supply of Apes");
        
        // 发送的以太坊 >= numberOfTokens * 0.08ETH
        require(apePrice.mul(numberOfTokens) <= msg.value, "Ether value sent is not correct");
        
        //铸造对应数量的APE
        for(uint i = 0; i < numberOfTokens; i++) {
        //获取总供应量 该方法继承于 ERC721 合约
            uint mintIndex = totalSupply();
           
            if (totalSupply() < MAX_APES) {
         //铸造BAYC msg.sender铸造者地址,mintIndex 铸造的BAYC的tokenId 该方法继承于 ERC721 合约
                _safeMint(msg.sender, mintIndex);
            }
        }

        // If we haven't set the starting index and this is either 1) the last saleable token or 2) the first token to be sold after
        // the end of pre-sale, set the starting index block
        if (startingIndexBlock == 0 && (totalSupply() == MAX_APES || block.timestamp >= REVEAL_TIMESTAMP)) {
            startingIndexBlock = block.number;
        } 
    }

    /**
     * Set the starting index for the collection
     * 设置对应的起始编号
     */
    function setStartingIndex() public {
        //起始编号为0  表示还没有被设置过
        require(startingIndex == 0, "Starting index is already set");
        // 起始区块的位置需要已经被设置
        require(startingIndexBlock != 0, "Starting index block must be set");
        
        //计算起始编号的值
        startingIndex = uint(blockhash(startingIndexBlock)) % MAX_APES;
        // Just a sanity case in the worst case if this function is called late (EVM only stores last 256 block hashes)
        // 最坏的情况下如果这个函数调用的太晚了  就用下面的方式计算起始编号的值
        if (block.number.sub(startingIndexBlock) > 255) {
            startingIndex = uint(blockhash(block.number - 1)) % MAX_APES;
        }
        // Prevent default sequence
        if (startingIndex == 0) {
            startingIndex = startingIndex.add(1);
        }
    }

    /**
     * Set the starting index block for the collection, essentially unblocking
     * setting starting index
     *设置起始块值
     */
    function emergencySetStartingIndexBlock() public onlyOwner {
        require(startingIndex == 0, "Starting index is already set");
        
        startingIndexBlock = block.number;
    }
}

原网站

版权声明
本文为[Nolan Mace]所创,转载请带上原文链接,感谢
https://blog.csdn.net/qq_42188030/article/details/126087854