raspberry pi servo control using pca9685

Overview

RPi_servo-control_pca9685

raspberry pi 180° servo control using pca9685

Requirements

Requires you to have the adafruit servokit library installed

You also need to configure i2c on your raspberry pi

Usage

Run main.py and type the number of the pin that the servo you wish to control is connected to eg. 0

Once you have done that it will reply with choose angle. Type the appropriate angle and hit enter, the selected servo should move to the specified angle.

You might also like...
A simple non-official manager interface I'm using for my Raspberry Pis.
A simple non-official manager interface I'm using for my Raspberry Pis.

My Raspberry Pi Manager Overview I have two Raspberry Pi 4 Model B devices that I hooked up to my two TVs (one in my bedroom and the other in my new g

A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost.
A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost.

distance sensor cube timer A rubiks cube timer using a distance sensor and a raspberry pi 4, and possibly the pi pico to reduce size and cost. How to

Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

Alternative firmware for ESP8266/ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability

Micro Displays for Raspberry Pi
Micro Displays for Raspberry Pi

micro-displays Micro Displays for Raspberry Pi Why? I'm super bored in lockdown. Add a Raspberry Pi 400 and a few tiny displays... The top half of the

A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico
A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico

rgbkeypad A Python class for controlling the Pimoroni RGB Keypad for the Raspberry Pi Pico. Compatible with MicroPython and CircuitPython. keypad = RG

Create a low powered, renewable generation forecast  display with a Raspberry Pi Zero & Inky wHAT.
Create a low powered, renewable generation forecast display with a Raspberry Pi Zero & Inky wHAT.

GB Renewable Forecast Display This Raspberry Pi powered eInk display aims to give you a quick way to time your home energy usage to help balance the g

Raspberry Pi Pico development platform for PlatformIO
Raspberry Pi Pico development platform for PlatformIO

Raspberry Pi Pico development platform for PlatformIO A few words in the beginning Before experimental please Reinstall the platform Version: 1.0.0 Th

Raspberry Pi Pico support for VS Code
Raspberry Pi Pico support for VS Code

Pico-Go VS Code Extension Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REP

Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi
Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi

Clean Dashboard for Pi-Hole Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi.

Releases(v3-beta)
Owner
I make bots and games and bots and games and bots and games
A iot Bike sytem based on RaspberryPi, Ardiuino

Cyclic 's Kernel ---- A iot Bike sytem based on RaspberryPi, Ardiuino, etc 0x1 What is This? Cyclic 's Kernel is an independent System With self-produ

Retr0mous 2 Oct 09, 2022
Better support for Nuki devices to the Home Assistant

Another attempt to add a better support for Nuki devices to the Home Assistant Features: Lock interface implementation Uses local webhook from bridge

Konstantin 105 Jan 07, 2023
A IC scan test interface for Arduino

ICSCAN_ARDUINO Prerequisites Python 3.6 or higher arduino uno or nano what is this It is a bitstream tranceiver to test IC chip It sends bitstream to

Nifty Chips Laboratory 0 Sep 15, 2022
DIY split-flap display

The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally availa

Scott Bezek 2.5k Jan 05, 2023
🎃 Some spooky code samples to hack yourself a pumpkin 👻

🎃 Tech Or Treat 👻 It's spooky season for those who celebrate Halloween, and to get in the spirit (spirit - get it? 👻 ) we thought it would be fun t

Jim Bennett 5 Feb 07, 2022
ArucoFollow - A script for Robot Operating System and it is a part of a project Robot

ArucoFollow ArucoFollow is a script for Robot Operating System and it is a part

5 Jan 25, 2022
A small Python app to converse between MQTT messages and 433MHz RF signals.

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

David Swarbrick 3 Jan 27, 2022
Philippe 1 Jan 09, 2022
Baseline model for Augmented Home Assistant

Dataset Preparation Step 1. Rename the Virtual-Home output directory to 'vh.[name]', for example: 'vh.door' Make sure the directory contains 100+ fram

Stanford HCI 1 Aug 24, 2022
Event-based hardware simulation framework

An event-based multi-device simulation framework providing configuration and orchestration of complex multi-device simulations.

Diamond Light Source Controls Group 3 Feb 01, 2022
LED effects plugin for klipper

This plugin allows Klipper to run effects and animations on addressable LEDs, such as Neopixels, WS2812 or SK6812.

Julian Schill 238 Jan 04, 2023
AERO 421: Spacecraft Attitude, Dynamics, and Control Final Project.

AERO - 421 Final Project Redevelopment Spacecraft Attitude, Dynamics, and Control: Simulation to determine and control a satellite's attitude in LEO.

Gagandeep Thapar 3 Dec 16, 2022
An open source two key macro-pad modeled to look like a cartoony melting popsicle

macropopsicle An open source two key macro-pad modeled to look like a cartoony melting popsicle. Build instructions Parts List -1x Top case half (3D p

17 Aug 18, 2022
NYCT-GTFS - Real-time NYC subway data parsing for humans

NYCT-GTFS - Real-time NYC subway data parsing for humans This python library provides a human-friendly, native python interface for dealing with the N

Andrew Dickinson 37 Dec 27, 2022
Terkin is a flexible data logger application for MicroPython and CPython environments.

Terkin Data logging for humans, written in MicroPython. Documentation: https://terkin.org/ Source Code: https://github.com/hiveeyes/terkin-datalogger

hiveeyes 45 Dec 15, 2022
Custom component for interacting with Octopus Energy

Home Assistant Octopus Energy ** WARNING: This component is currently a work in progress ** Custom component built from the ground up to bring your Oc

David Kendall 116 Jan 02, 2023
SALUS THERMOSTAT Custom component for Home-Assistant

Home-Assistant Custom Components Custom Components for Home-Assistant (http://www.home-assistant.io) Salus Thermostat Climate Component My device is R

21 Dec 18, 2022
Sensor of Temperature Feels Like for Home Assistant.

Please ⭐ this repo if you find it useful Sensor of Temperature Feels Like for Home Assistant Installation Install from HACS (recommended) Have HACS in

Andrey 60 Dec 25, 2022
Playing diabolo with two robot arms in ROS + Gazebo

Playing diabolo with robots This repository holds the ROS packages for playing diabolo with two UR5e robot arms on ROS Melodic (Ubuntu 18.04). Read ou

23 Dec 18, 2022
Controlling fireworks with micropython

Controlling-fireworks-with-micropython How the code works line 1-4 from machine

Montso Mokake 1 Jan 08, 2022