RHCE Course Summary

SAMBA+DHCP experiment

1. Configure multi-user mount and share the directory /devops on the server through SMB, and meet the following requirements:
1) The shared name is devops;
2) The shared directory devops can only be accessed by 192.168.43.0/24 network segment used by clients;
3) The shared directory devops must be browseable =Yes;
4) The user xixi must be able to access this share in read mode, and the access password is redhat;
5) User heihei must be able to read and write access to this share, the access password is redhat This share is permanently mounted in the /devops/ directory on 192.168.171.144, and uses user
xixi as authentication Any user can pass user heiheiTemporarily obtain write permission;
2. Configure dhcp to realize dynamic allocation and manual allocation;

Task 1.
Server>>
1. Mount and install

2. Turn off the firewall, selinux

3.Start service

4. Configuration file
[[email protected] ~]# vim /etc/samba/smb.conf

Create file resource:

Modify permission:

5. Add user

Change password

6. Restart the service

Create a shared file:

Client>>
1. Mount and install

2. Turn off the firewall, selinux

3.Auto mount at boot

4. Create a mount point directory






Test:

Task two,

1. Dynamic allocation
Mount installation:


Configuration info:

Reboot:

Check port status:

NetworkMa 1131 root 25uIPv4 34221 0t0 UDP 192.168.43.130:bootpc->192.168.43.254:bootps

2. Manual assignment

Experiment completed