A 3rd party Moonraker component to create timelapse of 3D prints.

Overview
Comments
  • Move out of range on first layer

    Move out of range on first layer

    Whenever I start a print, I have to remove the first instance of TIMELAPSE_TAKE_FRAME or else I get this error: !! Move out of range: -0.013 -0.013 0.285 [355.142]

    I'm not sure what's causing it. The timelapse park position is set to Center.

    question 
    opened by CobreDev 15
  • Probleme timelapse with ideamaker or ??

    Probleme timelapse with ideamaker or ??

    Hello everyone, I am having some problems with the timelapse and ideamaker option.

    At start gcode, I have purge line section. When printing with the timelapse function activated by layer change, this at the beginning is repeated at least 2 or even 3 times. can't find why? moreover in the console, I have a lot of command error message, a text that tries to be displayed somewhere?

    if anyone has any info?

    I note you if below my gcode in idea:

    Start Gcode G21 G90 M82 G28 G92 E0 G1 Z15.0 F60 G0 E3 F200 G92 E0 G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y160.0 Z0.28 F3000.0 E15 ;Draw the first line G1 X10.4 Y160.0 Z0.28 F3000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F3000.0 E30 ;Draw the second line G92 E0

    layer change gcode TIMELAPSE_TAKE_FRAME

    And here is an example of what I can find in the console: Capture d’écran 2022-08-21 162653

    I don't know, do you need to provide more information? I'm on mainsail updated

    Anyway, thanks in advance if you can help me.

    klippy.log moonraker.log

    opened by Egalistel 12
  • Wrong camera in Timelapse Status

    Wrong camera in Timelapse Status

    I have two cameras defines, "Upper" and "Lower". In the Settings page for Timelapse I have the Lower camera selected, but on the Timelapse Status page it is showing the view of the Upper camera. I've checked and the saved frames are also not the selected camera. I tried changing the selected camera and then selecting the desired one back, but that didn't fix the issue.

    wontfix 
    opened by sprior 11
  • Park feature not working

    Park feature not working

    Hi, I just set up moonraker timelapse, and I have the park feature enabled in the config, but it's not parking when it is supposed to send the screenshot gcode or whatever. It takes a picture each layer as enabled in my slicer, but it doesn't park in the same spot. I've attatched both my printer.cfg and timelapse.cfg, if anyone knows what's up, or maybe if I'm doing something wrong, please let me know. Thanks. printer.txt timelapse.txt .

    opened by Jonspeeth 9
  • after clicking first tiime render during print all later renders are the same length without the extra layers.

    after clicking first tiime render during print all later renders are the same length without the extra layers.

    after clicking render during print it saves to that exact layer as mp4, all the other times during print it exports the same file with different filename and without the new layers that have been captured. Still don't know what would happen at the end of the print. I'll update.

    image image
    opened by harellevy 8
  • Add a delayed last frame

    Add a delayed last frame

    Is it possible to modify the timelapse macro to get the last frame after the execution of the end g-code (to not have the hot-end in the last frame)? Or I missed some settings?

    Btw I'm not using (and prefer to not use) the park function to avoid stringing and prolonged times.

    documentation enhancement 
    opened by Sekenenz 8
  • Problems with the Park Toolhead function

    Problems with the Park Toolhead function

    Hello, I just installed the timelapse function and it is working. But I have problems with the Park Toolhead option, although I have it activated it does not work. What can I do in this case?

    opened by Bmerino16 7
  • wont take next frame

    wont take next frame

    hi

    i use fluidd, and time-frame/lapse on my command from terminal "TIMELAPSE_TAKE_FRAME" he take picture on my saved directory /tmp/timelapse/

    and it names frame000001.jpg

    on next command TIMELAPSE_TAKE_FRAME he doesn't take next number frame00002.jpg, he just overite 00001.jpg... what im doing wrong?

    when im download pic from raspi (cyberduck) to mac.. i'm only can open in photoshop, in normal pic view program got some error...

    sorry for bad eng

    opened by drveni 6
  • still having some config issues

    still having some config issues

    some fixed but still having this ones:

    check the logfile and fix the issue.

    Following plugin has an error:

    timelapse Invalid config option 'output_framerate: 20 # Note: this will be ignored if variable_fps is enabled' detected in section [timelapse]. To solve this issue check your moonraker config. This option is invalid and has to be deleted or fixed. In the future this will result in a startup error.

    Invalid config option 'time_format_code: %Y%m%d_%H%M' detected in section [timelapse]. To solve this issue check your moonraker config. This option is invalid and has to be deleted or fixed. In the future this will result in a startup error.

    Invalid config option 'snapshoturl: http://localhost:8080/?action=snapshot' detected in section [timelapse]. To solve this issue check your moonraker config. This option is invalid and has to be deleted or fixed. In the future this will result in a startup error.

    Invalid config option 'pixelformat: yuv420p' detected in section [timelapse]. To solve this issue check your moonraker config. This option is invalid and has to be deleted or fixed. In the future this will result in a startup error.

    Invalid config option 'previewimage: True' detected in section [timelapse]. To solve this issue check your moonraker config. This option is invalid and has to be deleted or fixed. In the future this will result in a startup error.

    opened by jbrandek 5
  • unable to set [timelapse] in moonraker.cfg file

    unable to set [timelapse] in moonraker.cfg file

    if I insert only: [timelapse]

    all works, but if I insert into: [timelapse] enabled: False

    error: % fluidd avvisi trovati. Moonraker ha problemi con dei plugin. Controlla i tuoi log, aggiorna la tua configurazione e riavvia moonraker. timelapse Puoi trovare la configurazione dei plug-in Moonraker qui .

    opened by pappicio 5
  • Thumbnail not loading: 401 unauthorized

    Thumbnail not loading: 401 unauthorized

    It might be a config issue but thumbnails and frames won't load. Any idea why? Error:

    error: { code: 401, message: "Unauthorized", traceback: "Traceback (most recent call last):

    File "/home/pi/moonraker-env/lib/python3.9/site-packages/tornado/web.py", line 1681, in _execute result = self.prepare()

    File "/home/pi/moonraker/moonraker/app.py", line 494, in prepare self.current_user = auth.check_authorized(self.request)

    File "/home/pi/moonraker/moonraker/components/authorization.py", line 675, in check_authorized raise HTTPError(401, "Unauthorized")

    tornado.web.HTTPError: HTTP 401: Unauthorized (Unauthorized) " }

    opened by emilevirus 4
  • Custom Install paths create installer issues

    Custom Install paths create installer issues

    Custom install paths make issues with the installer, which assumes to find klipper_config under /home/users, however for some reason my klipper install is simply under ~klipper. I have tried to link the folders as shown in a previous issue however now I am running into issues in mainsail where /home/user/printer_data/config/timelapse.cfg does not exist. As a new user to linux, I feel given enough time I can figure something out myself, however custom install paths would be a much appreciated addition

    opened by Supruh 1
  • Rendering timelapse on cancel print.

    Rendering timelapse on cancel print.

    Hi,

    I want it to try and render the timelapse on print stop. I think I can add the TIMELAPSE_RENDER gcode to my STOP_PRINT macro, but it says render is an "Internal use" Gcode macro.

    Is there a way I can do this?

    Thanks.

    opened by MalHaak 0
  • Timelapse not using the correct camera defined in UI

    Timelapse not using the correct camera defined in UI

    I have two cameras both streaming via mjpg_streamer using different ports on the same host.

    No matter how many times I restart and select the correct one, it still uses one camera.

    I wanted to try the snapshoturl in the moonraker.conf, but one of my cameras is mounted upside down (the one I'm trying to use) and I don't see a rotation configuration in the documentation (only 'flipX' and 'flipY').

    EDIT: Using fluidd

    opened by qoshh 0
  • Keeps losing frames

    Keeps losing frames

    "Error taking timelapse frame"

    Latest releases of Klipper, Moonraker, Fluidd and timelapse.

    In moonraker.log i find a lot of lines like the following:

    2022-12-05 20:16:57,143 [timelapse.py:getWebcamConfig()] - something went wrong gettingCam UUID:9d2f61bd-263e-4bbf-976b-21d4d7eaa2ce from Database. Exception: Key '9d2f61bd-263e-4bbf-976b-21d4d7eaa2ce' in namespace 'webcams' not found
    2022-12-05 20:16:57,239 [shell_command.py:_check_proc_success()] - Command (wget http://localhost:8080/?action=snapshot -O /tmp/timelapse/frame000001.jpg) successfully finished
    2022-12-05 20:17:11,822 [timelapse.py:getWebcamConfig()] - something went wrong gettingCam UUID:9d2f61bd-263e-4bbf-976b-21d4d7eaa2ce from Database. Exception: Key '9d2f61bd-263e-4bbf-976b-21d4d7eaa2ce' in namespace 'webcams' not found
    

    Despite the error, it manages to get nearly all the frames but when it doesn't it stops saving them.

    opened by dhstsw 3
  • How to use TEST_STREAM_DELAY

    How to use TEST_STREAM_DELAY

    Hey, first thanks for all the hard work that went into this. I was browsing through the code when I stumbled upon this macro and I am interested in calibrating the stream delay. From what I could infer, it moves from a small X value to the middle of the bed, takes a snap, and then moves to the other side of the bed. Then we should find the pic in the tmp folder and see if its blurry, and adjust the stream delay compensation higher or lower to make it not blurry.

    My problem is that when I tried to do this, I noticed that I got different values if I pre-move X to its starting point, or if I start the test from the far side. With a vale of 0.9 (which seems pretty high, I was taking successful timelapses with the default 0.05), I can take non blurry pics in the middle position, but if the head has to move from the other side of the bed to the starting point, then I get blurry pics again.

    So, since the value seems too high, and there is different behavior depending on where the head starts, I take that either I am using the test wrong or the code is a bit buggy. Any word on this?

    Thanks!

    opened by Itox001 1
Releases(v0.0.1)
Owner
Mainsail-Crew
Mainsail-Crew
Programming of Robotics Systems course at the University of Aveiro, Portugal, 2021-2022.

Programação de Sistemas Robóticos Miguel Riem Oliveira Universidade de Aveiro 2021-2022 Projeto AtlasCar Projecto RACE IROS 2014 AtlasCar2 ATOM IROS 2

Miguel Riem de Oliveira 22 Jul 13, 2022
FERM: A Framework for Efficient Robotic Manipulation

Framework for Efficient Robotic Manipulation FERM is a framework that enables robots to learn tasks within an hour of real time training.

Ruihan (Philip) Zhao 111 Dec 31, 2022
Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi

Clean Dashboard for Pi-Hole Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi.

Alessio Santoru 104 Dec 14, 2022
Cow Feeder is a bot automatically execute trade on cowswap

Cow Feeder is a bot automatically execute trade on cowswap, includes functions: Monitoring Ethereum network gas price and execute trade whe

6 Apr 20, 2022
USB Rubber Ducky with the Rasberry Pi pico microcontroller

pico-ducky Install Install and have your USB Rubber Ducky working in less than 5 minutes. Download CircuitPython for the Raspberry Pi Pico. Plug the d

AnOnYmOus001100 3 Oct 08, 2022
Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands

Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands ⚠️ This documentation is unofficial and is not

James 106 Dec 31, 2022
Lego Mindstorms EV3 and Lego Spike Prime

Lego Mindstorms EV3 and Lego Spike Prime What is FLL? The FIRST LEGO League Challenge Robotics Tournament challenges students from 9 to 16 years old t

Danimar Campos da Costa 1 Nov 14, 2021
Windhager myComfort custom component for Home Assistant

Windhager myComfort custom component for Home Assistant

5 Apr 27, 2022
Get input from OLED Joystick, Runs command, Displays output on OLED Screen (Great for P4wnP1)

p4wnsolo-joyterm Gets text input from OLED Joystick Runs the command you typed Displays output on OLED Screen (Great for P4wnP1 - even better on Raspb

PawnSolo 7 Dec 19, 2022
Home Assistant custom component to help ev-chargers stay below peak hourly energy levels.

Peaqev ev-charging Peaqev ev-charging is an attempt of charging an ev without breaching a preset monthly max-peak energy level. In order for this inte

Magnus Eldén 35 Dec 24, 2022
A PYTHON Library for Controlling Motors using SOLO Motor Controllers with RASPBERRY PI, Linux, windows, and more!

A PYTHON Library for Controlling Motors using SOLO Motor Controllers with RASPBERRY PI, Linux, windows, and more!

SOLO Motor Controllers 3 Apr 29, 2022
A simple program to make MSI Modern 15 speaker and microphone mute led work.

MSI Modern 15 sound led fixup for linux A simple program to fix the MSI Modern 15 speaker and microphone mute LEDs. Installation Requirements pulsectl

Seyed Danial Movahed 4 Oct 18, 2022
Huawei Solar sensors for Home Assistant

Huawei Solar Sensors This integration splits out the various values that are fetched from your Huawei Solar inverter into separate HomeAssistant senso

Thijs Walcarius 151 Dec 31, 2022
What if home automation was homoiconic? Just transformations of data? No more YAML!

radiale what if home-automation was also homoiconic? The upper or proximal row contains three bones, to which Gegenbaur has applied the terms radiale,

Felix Barbalet 21 Mar 26, 2022
Hardware: CTWingSKIT_BC28 Development Toolkit

IoT Portal Monitor Tools hardware: CTWingSKIT_BC28 Development Toolkit serial port driver: ST-LINK hardware development environment: Keli 5 MDK IoT pl

Fengming Zhang 1 Nov 07, 2021
CPU benchmark by calculating Pi, powered by Python3

cpu-benchmark Info: CPU benchmark by calculating Pi, powered by Python 3. Algorithm The program calculates pi with an accuracy of 10,000 decimal place

Alex Dedyura 20 Jan 03, 2023
A versatile program that uses the raspberry pi camera and provides it as a service

PiCameleon Is a daemon program meant to provide the RaspberryPi Camera as a service while running according to a configuration.

André Esser 52 Oct 16, 2022
The example shows using local self-hosted runners on-premises by making use of a runner on a Raspberry Pi with LED's attached to it

The example shows using local self-hosted runners on-premises by making use of a runner on a Raspberry Pi with LED's attached to it

Martin Woodward 6 Nov 13, 2021
A ESP32 project template with a web interface built in React

ESP AP Webserver demo.mp4 This is my experiment with "mobile app development" for the ESP32. The project consists of two parts, the ESP32 code and the

8 Dec 15, 2022
Mycodo is open source software for the Raspberry Pi that couples inputs and outputs in interesting ways to sense and manipulate the environment.

Mycodo Environmental Regulation System Latest version: 8.12.9 Mycodo is open source software for the Raspberry Pi that couples inputs and outputs in i

Kyle Gabriel 2.3k Dec 29, 2022