当前位置：网站首页>[BIM introduction practice] Revit building wall: detailed picture and text explanation of structure, envelope and lamination

[BIM introduction practice] Revit building wall: detailed picture and text explanation of structure, envelope and lamination

2022-04-23 03:56:00 【Liu Yige GIS】

This article mainly explains Revit Building wall ： structure 、 envelope 、 Lamination .

One 、 Basic wall

First step ：

Choose... From the menu bar 【 Architecture 】 Tab 【 wall 】 The drop-down menu →【 attribute 】 Switch to basic wall in the panel → Click... In the properties panel 【 Editing type 】, The following dialog box pops up .

Insert picture description here

The second step ：

choice 【 Copy 】 Button → Edit the name again , Name it “ The outer wall -1F-200mm”→ Click... To construct the subitem 【 edit 】 Button , eject 【 edit 】 Dialog box , As shown in the figure below ：

Insert picture description here

1、 Functions are divided into ： The structure layer 、 substrate 、 Insulation / Air layer 、 Surface course 1、 Surface course 2 And the coating layer 6 Subprojects .

The structural layer is masonry 、 Concrete structure, etc ; The substrate is the base layer of other materials , such as （ Plywood or gypsum board ）; Insulation / The air layer is a layer that insulates and prevents air penetration &#x

版权声明
本文为[Liu Yige GIS]所创，转载请带上原文链接，感谢
https://yzsam.com/2022/04/202204230351451490.html

边栏推荐

猜你喜欢

随机推荐