How did the computer reinstall the system? The display has no signal

Some friends may find that the monitor suddenly has no signal after reinstalling the system , This situation is not necessarily the cause of the system , We can judge the problem from a few simple points , For example, the display itself and its data line .

More system tutorials can be found on Xiaobai system reinstallation official website

System ：win10 pro

The computer ： ASUS computer  

1、 First check the data cable connected to the monitor , Check at both ends to see if the interface is loose , Then reseat the data cable .

​

2、 Of course, if the data line itself has been damaged, it will also lead to no signal , Of course, the data line itself is broken, which is still relatively rare .

3、 There may also be a problem with the hardware inside the computer , Memory module 、 If the graphics card is not plugged in properly, it may also cause the display to have no signal , You can plug it in again .

4、 If there is a lot of dust in the host , It will affect the interface and slot connection of each hardware , You can clean the dust of the chassis while checking the hardware .

5、 If the monitor is this kind of blue screen problem , It's about the system , Need to use u Make a system disk in other computers , Reinstall the system .

If there is a problem you can't solve , Just ask a local professional to repair it , Avoid other damages caused by improper operation .