Direct LiDAR Odometry: Fast Localization with Dense Point Clouds
DLO is a lightweight and computationally-efficient frontend LiDAR odometry solution with consistent and accurate localization. It features several algorithmic innovations that increase speed, accuracy, and robustness of pose estimation in perceptually-challenging environments and has been extensively tested on aerial and legged robots.
This work was part of NASA JPL Team CoSTAR's research and development efforts for the DARPA Subterranean Challenge, in which DLO was the primary state estimation component for our fleet of autonomous aerial vehicles.
Instructions
DLO requires an input point cloud of type sensor_msgs::PointCloud2 with an optional IMU input of type sensor_msgs::Imu. Note that although IMU data is not required, it can be used for initial gravity alignment and will help with point cloud registration.
Dependencies
Our system has been tested extensively on both Ubuntu 18.04 Bionic with ROS Melodic and Ubuntu 20.04 Focal with ROS Noetic, although other versions may work. The following configuration with required dependencies has been verified to be compatible:
- Ubuntu 18.04 or 20.04
- ROS Melodic or Noetic (
roscpp,std_msgs,sensor_msgs,geometry_msgs,pcl_ros) - C++ 14
- CMake >=
3.16.3 - OpenMP >=
4.5 - Point Cloud Library >=
1.10.0 - Eigen >=
3.3.7
Installing the binaries from Aptitude should work though:
sudo apt install libomp-dev libpcl-dev libeigen3-dev
Compiling
Create a catkin workspace, clone the direct_lidar_odometry repository into the src folder, and compile via the catkin_tools package (or catkin_make if preferred):
mkdir ws && cd ws && mkdir src && catkin init && cd src
git clone https://github.com/vectr-ucla/direct_lidar_odometry.git
catkin build
Execution
After sourcing the workspace, launch the DLO odometry and mapping ROS nodes via:
roslaunch direct_lidar_odometry dlo.launch \
pointcloud_topic:=/robot/velodyne_points \
imu_topic:=/robot/vn100/imu
Make sure to edit the pointcloud_topic and imu_topic input arguments with your specific topics. If IMU is not being used, set the dlo/imu ROS param to false in cfg/dlo.yaml. However, if IMU data is available, please allow DLO to calibrate and gravity align for three seconds before moving. Note that the current implementation assumes that LiDAR and IMU coordinate frames coincide, so please make sure that the sensors are physically mounted near each other.
Test Data
For your convenience, we provide example test data here (9 minutes, ~4.2GB). To run, first launch DLO (with default point cloud and IMU topics) via:
roslaunch direct_lidar_odometry dlo.launch
In a separate terminal session, play back the downloaded bag:
rosbag play dlo_test.bag
Citation
If you found this work useful, please cite our manuscript:
@article{chen2021direct,
title={Direct LiDAR Odometry: Fast Localization with Dense Point Clouds},
author={Chen, Kenny and Lopez, Brett T and Agha-mohammadi, Ali-akbar and Mehta, Ankur},
journal={arXiv preprint arXiv:2110.00605},
year={2021}
}
Acknowledgements
We thank the authors of the FastGICP and NanoFLANN open-source packages:
- Kenji Koide, Masashi Yokozuka, Shuji Oishi, and Atsuhiko Banno, “Voxelized GICP for Fast and Accurate 3D Point Cloud Registration,” in IEEE International Conference on Robotics and Automation (ICRA), IEEE, 2021, pp. 11 054–11 059.
- Jose Luis Blanco and Pranjal Kumar Rai, “NanoFLANN: a C++ Header-Only Fork of FLANN, A Library for Nearest Neighbor (NN) with KD-Trees,” https://github.com/jlblancoc/nanoflann, 2014.
License
This work is licensed under the terms of the MIT license.
When using 
Thank you very much!
33 Oct 14, 2022
844 Dec 28, 2022
31 Oct 25, 2022
10 Nov 14, 2022
65 Dec 20, 2022
1.2k Dec 29, 2022
43 Nov 21, 2022
169 Dec 23, 2022
3 Nov 15, 2022
142 Dec 28, 2022
1 Mar 18, 2022
4 Jun 09, 2021
41 Dec 13, 2022
32 Dec 05, 2022
162 Jan 06, 2023
144 Dec 30, 2022
464 Dec 19, 2022
21.1k Dec 29, 2022
47 Jul 26, 2022
181 Jan 04, 2023